Pre-decorated fibre cement siding board.
Install WeatherClad® with a minimum 38 mm ventilated cavity to reverse of planks. Timber battens should have a minimum dimension of 38 mm deep x 38 mm wide and be positioned at maximum span of 600 mm. Fixings are generally concealed as planks should overlap by approximately 30 mm to the plank below. These principles ensure that the system is ventilated to reduce the risk of moisture penetration into the building.
WeatherClad® is a wood effect autoclaved cellulose fibre reinforced cement siding board manufactured from Portland cement, cellulose fibres, finely ground sand and water. Available in a range of colours and wood stains.
Features and benefits:
Applications:
Install WeatherClad® with a minimum 38 mm ventilated cavity to reverse of planks. Timber battens should have a minimum dimension of 38 mm deep x 38 mm wide and be positioned at maximum span of 600 mm. Fixings are generally concealed as planks should overlap by approximately 30 mm to the plank below. These principles ensure that the system is ventilated to reduce the risk of moisture penetration into the building.
Uniclass 2015 |
Product Reference | WeatherClad |
Colour/ Finish | Available in a range of colours and woodstains. See 'Options' below and insert requirements. |
Surface texture | Wood grain |
Fixings | Self-drilling, stainless steel screwsManufacturer recommended. Can be colour matched. Consult manufacturer and insert requirements. Stainless steel annular ring shank nailsCan be colour matched. Consult manufacturer and insert requirements. |
Accessories | Colour matched profilesConsult manufacturer and insert requirements. Colour matched trimsConsult manufacturer and insert requirements. |
Standard product features | Sizes:
Surface texture: Wood grain. Technical characteristics;
|
Product Options | Colour/ Finish: - Standard colours:
- Woodstains:
Additional RAL colours are available on request. Consult manufacturer for details. Fixings: - Screw fixing:
- Nail fixing: 2.8 x 50 mm, with 7 mm head. Nails must not infringe closer than 50 mm to plank edges without pre-drilling. With pre-drilling fixings may be positioned up to 20 mm from plank edges. Fixings should not be closer than 20 mm to the top edge of the planks. |