Verified by manufacturer 24 days ago
Environmental Product Declaration (EPD) - BRE
Square, rectangular or diamond-shaped cladding panels that interlock into each other on the four sides.
A cladding solution that provides a longitudinal flat seam. Panels can be square, rectangular or diamond shaped, interlock into each other on the four sides and are secured with concealed fasteners and clips.
The system consists of panels with 180 degree hems approximately 25 mm wide that interlock and are held on the substrate using cleats.
Flatlock panels can be installed aligned or staggered, and both horizontally and vertically or even at an angle. The panels should be installed on a vertical wall or soffit. The façade system involves laying the panels on a compatible wooden framework or plywood fixed to the supporting structure (masonry or metal structure).
The maximum recommended visible width for a panel is 600 mm with the maximum length being 3000 mm. The thickness of the zinc used will depend on panel dimensions with small panels using 0.7 mm zinc whereas the larger panels will require 1 mm thick zinc.
Features and benefits:
A product which allows zinc to be installed on ventilated plywood as well as specific warm (non-ventilated) substrates. The product consists of VMZINC (in all finishes) having a 60 μm coating applied to the underside thus allowing a more varied amount of substrates to be used and eliminating the risk of the formation of white rust on the underside of the zinc standing seam panels. VMZINC PLUS resists to an abrasion of 140 L when tested in accordance with ASTM D 968.
Life Cycle Analysis (LCA):
VMZINC undertakes Life Cycle Analysis (LCA) tests on its products and publishes Environmental Product Declarations (EPDs), such as BRE Environmental Profiles, available from our website www.vmzinc.co.uk and www.greenbooklive.com. These provide users with comprehensive, reliable and transparent information on relevant environmental characteristics. The information is also used by VMZINC as the basis for its eco-design approach.
Up to 50 year material warranty available on a project basis.
H74/130 Zinc sheet fully supported wall covering
Design of zinc sheet fully supported wall covering systems
18 mm plywood or steel deck.
Battens creating a vented 38 mm airspace.
18 mm plywood or steel deck.
Fasteners to substrate
Fixing cleat and strip. It is recommended that screws be used to secure the cleats. The use of nails offers significantly less resistance, but in the event of using nails, contractors are advised to use ring shank nails.
VMZINC continuous corner strip.
VMZINC Plus sheet clip.
VMZINC PLUS continuous folded strip.
VMZINC continuous folded strip, 0.7 mm thick.
VMZINC continuous welted strip.
VMZINC PLUS flashing.
VMZINC PLUS sheet clip (80 mm), 0.7 mm thick.
The sizes indicated correspond to dimensions as seen on the finished wall. Diamond shingles are as standard supplied with non-aligned joints. All panels are delivered with stainless steel clips.
Diamond (Narrow), 371 x 193 mm.
Diamond (Narrow), 391 x 206 mm.
Diamond (Narrow), 585 x 301 mm.
Diamond (Wide), 274 x 215 mm.
Diamond (Wide), 290 x 230 mm.
Diamond (Wide), 432 x 336 mm.
Rectangular, 235 x 470 mm.
Rectangular, 235 x 940 mm.
Rectangular, 420 x 630 mm.
Rectangular, 420 x 840 mm.
Rectangular, 590 x 885 mm.
Square, 235 x 235 mm.
Square, 420 x 420 mm.
Square, 590 x 590 mm.
Only available with Natural colour option.
Fire classification A1 (Natural Zinc, QUARTZ ZINC, ANTHRA-ZINC and AZENGAR) and A2-s1,d0 (PIGMENTO and VMZINC PLUS) according to EN 13501-1:2002.
BS EN 988, EN 15804, ASTM D 968, ISO 14001 and ISO 9001.
VMZINC Fully Supported Facades - Flat Lock Cladding
Only available with Natural finish option. Natural VMZINC has a shiny metallic appearance when new and develops a patina over time. In facade applications, it may take 10 years for the matt grey patina to form. It can be quickly soldered without removing the patina.
Standard PIGMENTO® BLUE.
Standard PIGMENTO® GREEN.
Standard PIGMENTO® BROWN.
Standard PIGMENTO® RED.
Standard PIGMENTO® GREY.
PIGMENTO® STORM GREY.
PIGMENTO® CHARCOAL GREY.
QUARTZ-ZINC offers an appearance and texture that does not change over time. When QUARTZ-ZINC is scratched, it will self heal. The grey tones of QUARTZ-ZINC blend well with existing construction materials – ideal for refurbishment.
ANTHRA-ZINC with its visible grain matches the colour of slate and blends well in combination with photovoltaic panels.
AZENGAR is the surface finish from VMZINC which is the first engraved zinc giving a product with a matt, heterogeneous and light aspect. AZENGAR can be used in the same fashion as other VMZINC products for both roofs and facades.
Contains Red List materials
Country of material origin
Country of product manufacture
See EN15804 EPD.
VMZINC General Technical Recommendations - Design Guidance for Architects & Contractors.
VMZINC Facades - Fully Supported Facades & Rainscreen Facades July 2019
VMZINC EN15804 Natural Rolled Zinc
EN15804 Pre-Weathered QUARTZ PLUS & ANTHRA PLUS
BRE Certification EN15804 Pre-Weathered Rolled QUARTZ & ANTHRA
BRE Certification EN15804 Pre-Weathered PIGMENTO & STRAT