Vandex BB 75

Vandex BB 75

Safeguard Europe Ltd Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

  • QA Certificate

    QA Certificate

    Certificate type

A cementitious, ready-mixed, efflorescence-free surface waterproofer with hydrophobic properties, resistant to water and moisture.

Jump to:
+44 (0)1403 210204

Vandex BB 75 is a cementitious, efflorescence-free surface waterproofer (tanking slurry) with hydrophobic properties, resistant to water and moisture.

Vandex BB 75 is applied by trowel or spray to surfaces such as concrete, masonry, and render, which have to be sealed and protected against the influence of water and moisture. Typical areas of application include:

  • Basement/ Cellar refurbishment.
  • Underground car parks.
  • Retaining walls.
  • Lift pits.
  • Tanks/ Reservoirs/ Water treatment works.

Once cured, Vandex BB 75 tanking slurry forms a waterproof coating (tested up to 7 bar). It can be employed against active and passive water pressures, and is approved for use in contact with potable water. The initial and final bonding capability of Vandex BB 75 is excellent, making it suitable for application to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, whilst remaining vapour-permeable.

Vandex BB 75 is not intended to provide a decorative finish.

To be applied by a suitably qualified contractor.

General information

Uniclass 2015

Pr_20_31_53_66 Polymer-modified cementitious slurriesPrimary


J10/110 Proprietary mortar

J30/110 Cold applied tanking . . . . . .

Specification data - Polymer-modified cementitious slurries

Product Reference

Vandex BB 75 tanking slurry

Overall thickness (minimum)

1.5 mm

Against ground moisture. Requires approximately 3 kg/m².

2 mm

Against pressureless surface water and seepage. Requires approximately 4 kg/m².

3 mm

Against water under pressure. Requires approximately 6 kg/m².

Contractor's choice to prevent water ingress

Standard product features



Maximum coverage rate/ layer:

4 kg/m² (approximately 2 mm thickness).

Maximum thickness of coating (overall):

5 mm.

Third party certifications
  • 04/4188
  • CE Marking: EN 1504-3 : Structural and non-structural repair
Similar products from Safeguard Europe Ltd