NBS Source
List your products
V Joint Soffit System
Description

Extruded aluminium plank type system with interlocking V joints.

  • Suitable for soffit or vertical rainscreen cladding such as gable infills and spandrel panels.
  • 150 mm coverwidth, robust extrusion, 2 mm gauge, with complementary edge and cover trims.
  • Replicates traditional 'tongue and groove' appearance.
  • Complete system includes Bailey Support Carcassing for suspension from primary building structure, ensuring correct alignment and adjustability.
  • Supplied in 3 m lengths as standard, with shorter lengths available as option.
  • Tolerance within V joint allows for installing to sectional curve.
  • Powder coated finish with choice of colour. Applied in-house with thirty year guarantee available on application, subject to location.
  • Anodized and PVDF finish option available.
  • Suitable for use with Bailey Fascia System to provide combined Eaves System.
  • Detail design service available from supplier. Installation by recommended subcontractors.

Fixings:

  • Aluminium rivets and stainless steel self-drill and tap screws.
  • Typically at 0.6m centres, but consult supplier for individual project specification.

General information
Finish

Interpon D, colour ___, gloss level ___

Polyester powder coating - standard option.

Syntha Pulvin, colour ___, gloss level ___

Non standard option.

Anodized, colour ___

Non standard option.

PVDF , colour ___

Non standard option.

Specification data
Product Reference

V Joint Soffit System

Layout

As drawing ___

Plank -
Length

3000 mm

Standard option.

___ mm

Length (maximum): 3000 mm.

Rear edge trim

With 25 mm vent

Needle punched vent, requires no insect screen.

With 10 mm vent

Needle punched vent, requires no insect screen.

Standard unvented

As drawing ___

Submit proposals

Finish

Interpon D, colour ___, gloss level ___

Polyester powder coating - standard option.

Syntha Pulvin, colour ___, gloss level ___

Non standard option.

Anodized, colour ___

Non standard option.

PVDF , colour ___

Non standard option.

Other requirements/ Accessories

T trim

Masks cut edges.

Mitre cover strip

Masks cut edges at mitres and other straight joints.

300 x 300 mm access hatch

Extruded rear edge trim

Pressed rear edge trim

2 way starter trim

For vertical gable infill applications.

Standard product features

Layout:

  • For layouts parallel to building face, planks are typically installed from fascia inwards.
  • Rear edge trim accommodates lateral tolerance. Last soffit plank is cut to fit on site. Cut edge is concealed by Rear edge trim.
  • On large soffit areas requiring multiple plank lengths, end joints are lightly abutted and staggered in 'stretcher bond' fashion. The linear V joint emphasis is thus maintained.

Supports:

- Fixed to Bailey Carcassing System, off primary building structure. Consult supplier for project specific configuration.

Finish:

Consult supplier for colour choice.

– Standard polyester powder coating: Interpon D1036, standard colour range.

  • Electrostatically applied to BS EN 12206 and Qualicoat Class 1 standards.
  • Compliant to ECHA standards which includes Chrome Free solution.
  • Film thickness: 60µ (minimum 50µ).

Similar products from Bailey - Total Building Envelope