NBS Source
I'm a manufacturer
Compare variants

Type B Rack

Verified by manufacturer 7 months ago

138 200 228

AUTOPA Limited Variant:

Floor mounted cycle rack.

Jump to:
+44 (0)1788 550556 Website

Application

Suitable for all environments where high density, single sided cycle parking is required.

Description

The AUTOPA Type B Cycle Rack is a floor mounted cycle rack based upon the Model R Holder.


Features and benefits:

  • The Type B offers a high single sided cycle parking density.
  • The high and low holders combined ensure that cycles are parked only 305 mm apart (typical parking distance for a Sheffield Cycle Stand is 500 mm).
  • The high holders, which incorporate ramps are alternated with the low holders, ensuring that all holders can accommodate bicycles at the same time at a higher density than single level cycle parking racks.
  • The practical and durable nature of the AUTOPA Type B Cycle Rack ensures that the rack is suitable for all environments where high density, single sided cycle parking is required.
  • 696 mm (height).
  • 1057 mm (width).
  • 305 mm distance between holders (centre to centre).
  • 3 mm galvanized mild steel tube.
  • 20 mm galvanized mild steel bar.
  • Other sizes are available; consult manufacturer.


Installation:

  • Flanged versions require bolting to a suitable concrete surface.
  • Ragged versions require casting into concreted hole, no less than 300 x 300 x 350 mm.
  • Some on-site assembly may be required.

General information

Finish

Galvanized

Guidance for specification option:

Manufactured from mild steel and galvanised to ensure their longevity

Material

Steel

Length

-

Manufacturer guidance

Length varies per number of holders

Width

1057 mm

Height

696 mm

Warranty description

One year

Guidance for specification option:

This product is guaranteed for 12 months (if installed and used correctly).

Uniclass

Pr_40_30_21_12 Carbon steel cycle standsPrimary

CAWS

Q50/32 Cycle stands

Q50/210 Cycle stands

Product range

Velopa Cycle Security

Specification data - Carbon steel cycle stands

Stand type

Cycle.

Number of stands

2.

Base

Ragged.

Finish as delivered

Galvanized.

Weight

11 kg.

Accessories

Not required.

138 100 994 - 12mm Expanding Bolt (3 required per flange).

138 100 999 - 10mm Expanding Bolts (1 required per ramp).

Standards

To ISO 9001, ISO 14001 and OHSAS 18001.

Sustainability data

Country of product manufacture

United Kingdom

Similar products from AUTOPA Limited

Bilton Cycle Stand - Galvanised

Bilton Cycle Stand - Galvanised

Eco Sheffield Cycle Stand - Galvanised

Eco Sheffield Cycle Stand - Galvanised

F90

F90

Frankton Cycle Stand - Galvanised

Frankton Cycle Stand - Galvanised

Hillmorton Cycle Stand - Galvanised

Hillmorton Cycle Stand - Galvanised

Kirby Cycle Stand - Galvanised

Kirby Cycle Stand - Galvanised

Model R

Model R

Semi-Vertical Rack

Semi-Vertical Rack

Sheffield Cycle Stand - Galvanised

Sheffield Cycle Stand - Galvanised

Sheffield Toast Rack - Galvanised

Sheffield Toast Rack - Galvanised