Tube Motor Roller Shutter - Electric Roller Shutters

To BS EN 13241-1:2003 + A2:2016 and BS EN 12604:2017.

External.

Vertical, face-fitted across opening.

Manufacturer's standard.

Guidance for specification option:

Consult manufacturer for details.

To BS EN 12424, up to Class 5.

Manufacturer's standard.

Guidance for specification option:

Consult manufacturer for details.

Manufacturer's standard.

Guidance for specification option:

Consult manufacturer for details.

Manufacturer's standard.

Guidance for specification option:

Consult manufacturer for details.

Manufacturer's standard.

Guidance for specification option:

Consult manufacturer for details.

Galvanized steel.

Guidance for specification option:

• The shutter curtain is constructed from cold rolled galvanized concave steel laths (76 mm x 22 swg).
• Other gauges may be supplied depending on the shutter width.
• Each lath is retained by pressed steel or nylon end locks fixed with galvanised steel rivets.

Concave, plain.

Guidance for specification option:

Standard.

Concave, perforated.

Guidance for specification option:

Note that additional cost applies, consult manufacturer for details.

Galvanized/ plastisol to external face.

Guidance for specification option:

Standard.

• Side guides, supporting angles and door curtain are galvanized.
• Non-galvanized sections are primer painted.

Powder-coating.

Guidance for specification option:

Insert colour requirements, RAL or BS.

Note that additional cost applies, consult manufacturer for details.

Steel.

Guidance for specification option:

Bottom rail:

• A rigid inverted L-section or T-section bottom rail, formed from a cold rolled galvanized section.

Side guides and angles:

• A purpose cold-rolled galvanized steel section 65 mm deep.
• Galvanized steel angles of suitable size and thickness are supplied to support the side guides and form a secure fixing to the structure.

Roller barrel:

• Constructed from mild steel tube of suitable outside diameter and wall thickness to suit shutter application.
• The barrel encases the 240 volt tubular motor.
• The main body of the motor is fixed to the door bracket plate and the outer body rotates the barrel, opening and closing the door.

Endplates:

• 3 mm galvanized steel either 250 x 250 mm, 300 x 300 mm or 350 x 350 mm and fixed to the supporting angles or flats, complete with cleats for hoods or fascias if required.

Galvanized/ plastisol to external face.

Guidance for specification option:

Standard.

• Side guides, supporting angles and door curtain are galvanized.
• Non-galvanized sections are primer painted.

Powder-coating.

Guidance for specification option:

Note that additional cost applies, consult manufacturer for details.

Galvanized.

Other.

Guidance for specification option:

Powder-coating finish only.

Insert colour requirements, RAL or BS.

Manufacturer's standard (where applicable).

Guidance for specification option:

Insert requirements to suit structure.

Guidance for specification option:

Consult manufacturer for options and insert requirements, or omit.

Paddle switch.

Surface-mounted key switch.

Flush-mounted key switch.

Remote control (via key fob).

None.

Coil casings (hoods).

Guidance for specification option:

Can be supplied at additional cost and are supplied galvanized unless specified otherwise.

Fascias.

Guidance for specification option:

Can be supplied at additional cost and are supplied galvanized unless specified otherwise.

Motor covers.

Guidance for specification option:

Can be supplied at additional cost and are supplied galvanized unless specified otherwise.

Pass door.