Traditional Textures Reveal Panel
Aluminium reveal panel.
Application
- Typically fixed back to timber or metal sub frames with a pressure equalized, ventilated cavity.
- The reveal panel is also suitable for use as a soffit system.
Description
Reveal panel suitable for cladding applications. Installation is straightforward, one panel interlocking into the next with a concealed fixing.
Features and benefits:
- Suitable for situations where traditional metal roofing is preferred but with a requirement for a flatter appearance than standing seam type systems.
- Can be manufactured in various widths/ shadow gap combinations.
- Panels can be installed horizontally, vertically or diagonally.
- Bespoke reveal panels design is also available, consult manufacturer for details.
- A standard range of details are also available, consult manufacturer for details.
- Resistance to cracking on rapid deformation to EN 13523-5 and ASTM D 2749: No cracking, no loss of adhesion.
- Resistance to cracking on bending to EN 13523-7 and ASTM D 870: Very good flexibility (0.5T).
- Water immersion (and humidity) resistance to EN 13523-9/ 25 and ASTM D 870/ 2247: 3000 h.
General information
Material | Aluminium |
Uniclass | |
CAWS | G20/950 Fascias/ barges/ soffits G20/99 Fascias/ barges/ soffits H31/10 Metal H31/120 Metal |
Specification data - Aluminium long strips Enhanced data
WidthUp to 333 mm; insert requirements. | Max 300 mm, insert requirements. |
Factory finishesThe precoated aluminium is also available in any RAL colour as well as many other specialist finishes. Consult manufacturer for details. | Copper Oxide.Copper Patina.Dark Zinc Patina.Zinc Patina.RAL, other.Insert requirements. Blue Zinc Patina.Available on request. Copper Metallic.Available on request. Corten.Available on request. Graphite Patina.Available on request. Green Zinc Patina.Available on request. Inca Gold.Available on request. Red Zinc Patina.Available on request. RAL 7016, Anthracite Grey |
Thickness | 1.0 mm. |
Reaction to fire | - |
External face | To EN 13501, A1. |
Product Reference | Traditional Textures Reveal Panel |
Orientation | Vertical. Horizontal. Diagonal. Insert required angle. |
Colour/ Finish | Copper Oxide. Copper Patina. Dark Zinc Patina. Zinc Patina. RAL, other. Insert requirements. |
LengthInsert requirements. | - |
Joint width1–20 mm. | 1-20 mm. |
Coating thickness (minimum) | 50 µm (three coats). |
Durability | To NF EN 1396, Class 4. |
Literature
Traditional Textures Precoated Aluminium
Similar products from Metal Solutions Limited
Traditional Textures Batten Roll
Traditional Textures Shingles
Traditional Textures Snaplock® Seam
Traditional Textures Standing Seam