TRADECC PC Leakinject Hydrogel 6880 - Water Stop for Leakages and Water Penetrations - Low Viscosity PU Injection Resin
Verified by manufacturer 5 months ago
DoP
Certificate type
Polyurethane injection resins.
Application
Please refer to the datasheet for this information.
Description
A ready-to-use, single-component PU resin with low viscosity. Reacts in contact with water to form a flexible, closed cell foam that is used as a water stop for leakages and water penetrations (pressurized and non-pressurized) in floors, walls, masonry, underground structures and concrete constructions.
General information
Color | White Manufacturer guidanceYellow/ Pale brown. |
Finish | Smooth Guidance for specification option: Flexible, closed-cell foam |
Material | Polyurethane |
Shape | Formless |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Warranty description | Guidance for specification option: When specified, installed and protected in accordance with the data sheet, fully and permanently isolated from UV light and physical damage or wearing, and only to those substrates confirmed within, TRADECC PC Leakinject Hydrogel 6880 has a service life that can be equal to the design life of the structure |
Uniclass | |
CAWS | C42/340 Crack/ void sealing grouts |
Specification data - Polyurethane (PUR) construction joint sealants
Material | Single component polyurethane injection resin. |
Colour | White. |
Foaming | Yes - with water. |
Sealing | No. |
Viscosity at 20°C | 280 mPa/S. 310 mPas. |
Viscosity Category | Medium - low. |
Water source | Within substrate or added. |
Controlled reaction | No. |
Final performance | Stable. |
Shrinkage | No. |
Flexibility | Some. |
Working time | Use immediately. |
Reaction time | 2 minutes. |
Rate of expansion | 300%. |
Adhesion | Good. |
Density | 1.132 g/cm³. |
Viscosity at 5°C | 635 mPas. |
Viscosity at 10°C | 443 mPas. |
Viscosity at 15°C | 375 mPas. |
Viscosity at 25°C | 280 mPas. |
Viscosity at 30°C | 230 mPas. |
Application temperature range | +5°C to +30°C. |
Capacity | 25 kg container (resin). |
Sustainability data
Country of material origin | Belgium |
Country of product manufacture | Belgium |
Recyclability | 0 |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 0 % |
Third party certifications
DoP
TRADECC PC Leakinject Hydrogel 6880 - DoP
Literature
TRADECC Leakinject Hyrdrogel 6880 TDS
Resin Injection Comparison Table
Case studies
Injection Hose Waterproofing, Jersey
Similar products from Newton Waterproofing Systems
TRADECC PC LeakInject 2K Flex 6811 LV For Water Sealing Underground and Concrete Structures - Low Viscosity Elastic PU Injection Resin