Double skin, clean room partitioning system.
Titan is a high quality demountable, double skin partitioning system designed and manufactured for clean room applications. Its two line junction and flush double glazing make it the ideal product for clean room construction.
The system is based on standard panels in full steel or steel and glass and comes complete with a range of door types and styles. The system features controlled factory assembled units of mono-bloc construction, with two steel skins separated by a composite honeycomb infill and uses a concealed cleat system for site assembly. Removable vertical junction channels give access for wiring. The partitions are non-fire rated.
Sound reduction of 32dB to BS EN ISO 140-3: 1995 and BS EN ISO 717-1:1997 can be achieved depending on the height and specification required. Higher ratings can be achieved if required.
100 mm high satin finish stainless steel kick plate, satin finish stainless steel push plate
Carbon steel facings with bonded composite core
Our warranty shall apply when the products supplied by Troax and installed in accordance with our standard installation instructions or by Troax installers and will be subject to assessment by a Troax representative if deemed to be required
Titan CR-2 partitioning
Exposed framing to panels, comprising steel channels cleat fixed together to form a two line concealed joint
Matching sections for corners and junctions. 50 x 50 mm steel hollow section support mullions at 3000mm centres bolted to the floor through in line base plates with M10 countersunk expanding anchors
Top capping channel and cover strips for joints
White RAL 9010
Grey BS 00A05
Grey RAL 7037
Sandstone BS 08B17
Blue RAL 5010
Concealed cleat system
Steel-glass-steel with glazed panel from 1091-2031 mm above ffl
Steel-glass-steel with glazed panel from 431-2031 mm above ffl (500 mm wide panel only)
6 mm toughened glass in 51 mm flush double glazed system
Integral blinds within double glazed units
Hinged steel single doors
Hinged steel double doors
Hinged timber single doors
Hinged timber double doors
Hinged laminate single doors
Hinged laminate double doors
Sliding steel doors
Steel pressed box section
900 x 2023 mm single leaf
1000 x 2023 mm single leaf
1851 x 2023 mm double leaf
2051 x 2023 mm double leaf
1000 x 2180mm sliding door
2000 x 2180mm sliding door
Manufacturers standard in stainless steel
Ceilings and lights
Drop down hatch with hinged flap
Sliding glass hatch
Panels with service outlets
Rolled up floor detail
Door with automatic operation
|Standard product features|
Nominally 17 kg/m² excluding glass.
Panels are available in a range of five standard colours, but corporate colours and non-standard colours, to the nearest RAL or BS colour, are available on request.
Ironmongery options include: 3 lever mortise lock with lever handles, pull handle and push plate, mortise lock with euro profile cylinder, digital lock, claw lock for sliding doors and all doors can be padlockable.
Partition abutments, Skirting / Sills, Vision panels, Cable management / outlets, Accessories:
Consult manufacturer for recommendations and details.