NBS Source
List your products
Timonox Upgrade Basecoat
Description

A water-based, high build coating, which is formulated for use on timber based substrates, and provides a thick insulating char layer in the event of a fire.

Crown Trade Timonox Upgrade Basecoat – also used to upgrade the fire classification of combustible substrates and previously painted (multi layer) non combustible substrates.

A durable finish is provided by over-coatings with suitable fire tested Crown Trade Timonox finishes only.

Refer to the Product Data Sheet for the appropriate Timonox finish for additional information on the available fire tested systems.

General information

Finish

Matt

Uniclass 2015

Pr_35_31_68_43 Intumescent protective coatingsPrimary

CAWS

M60/175 Protective coating

M60/18 Special coating

Specification data - Intumescent protective coatings

Product Reference

Timonox Upgrade Basecoat

Standard product features

Colour:

White.

Finish:

Matt.

Composition:

  • Pigment: Titanium dioxide and extenders.
  • Binder: Vinyl copolymer.
  • Solvent: Water.

Drying time:

Recoatable after six hours under normal drying conditions.

Spreading rate:

Up to 2.5* m²/ litre on smooth surfaces.

Wet film thickness:

400* micrometres at 2.5 m²/ litre.

Dry film thickness:

200* micrometres at 2.5 m²/ litre.

* These figures correspond to those quoted in Fire Test Reports and show the minimum film build required.

VOC Content:

EU limit value for this product (cat A/i): 140 g/L (2010). This product contains maximum 2 g/L VOC.

Third party certifications
  • BS 476 Parts 6 and 7 : Tested at Exova Warringtonfire
  • BS EN ISO 11285-2 : Tested at Exova Warringtonfire
  • BS EN 13823. : Tested at Exova Warringtonfire
Similar products from Crown Trade, product of Crown Paints Ltd