Compare

Timber Frame Ties - Type 6 - V61

Name: Timber Frame Ties - Type 6 - V61
Brand: Vista Engineering Ltd
SKU: 4cN3eXoHaVkvc1xj5ciKnW

Verified by manufacturer 1 month ago

125 mm long, for 50 mm cavity

Vista Engineering Ltd

Third party certifications:

ISO 14001 Environmental Management Systems
Certificate type
ISO 45001 Health and Safety Management
Certificate type
ISO 9001 Quality Management
Certificate type

Type 6 stainless steel masonry-timber tie for domestic and small commercial buildings up to four storeys high. Suitable for buildings with a maximum height if 15 m and cavity widths from 50–100 mm.

Jump to:

+44 (0)1663 736700 Website

Application

Designed to secure an inner timber frame to an outer brick skin

Description

Type 6 stainless steel masonry-timber tie for domestic and small commercial buildings up to four storeys high. Suitable for buildings with a maximum height if 15 m and cavity widths from 50–100 mm.

Features and benefits:

This type of timber frame wall tie is right for domestic and small commercial builds. They are suitable for flat sites where the basic wind speed is up to 25 m/s and altitude is not greater than 150 m above sea level.
Designed for timber frame buildings that accommodates vertical movement.
Manufactured from grade 304 stainless steel.
Non-combustible (as defined in the national Building Regulations).
Excellent corrosion resistance and a service life of not less than 60 years.
In situations where thermal losses through ties need to be taken into account, the products will adequately resist thermal transmittance through a wall cavity
Tested as Type B (sound) and as Type 6 (strength) to BS EN 845-1.

General information

Color	Silver
Material	Stainless steel Guidance for specification option: Grade 304.
Length	125 mm 150 mm 175 mm

Uniclass	Pr_20_85_84_19 Cavity wall tiesPrimary
CAWS	F30/220 Wall ties F30/214 Cavity wall ties F30/215 Cavity wall ties used with partial fill insulation F30/24 Cavity wall ties F30/26 Wall ties F30/25 Cavity wall ties used with partial fill insulation

Specification data - Cavity wall ties

Standard	To BS EN 845-1.
Tie type	Type 6 (strength) to BS EN 845-1. Guidance for specification option: Stainless steel masonry-timber tie for domestic and small commercial buildings up to four storeys high. Suitable for buildings with a maximum height if 15 m and cavity widths from 50 to 100 mm. Designed to accommodate vertical movement.
Material	Grade 304 stainless steel.
Length	125 mm.
End types	Manufacturer's standard. Guidance for specification option: Consult manufacturer for details.
Design embedment length (minimum)	Manufacturer's standard. Guidance for specification option: Consult manufacturer for details.
Movement	Manufacturer's standard.
Additional requirements	-
Mortar joint thickness (minimum)	Manufacturer's standard. Guidance for specification option: Consult manufacturer for details.
Resistance to water crossing cavity	Resistant (drip feature).
Slope tolerance	Manufacturer's standard.
Compressive load capacity	Timber end: 531 N/ 450 N; mortar end: 604 N. Guidance for specification option: Timber end: As received/ 24 mm movement.
Tensile load capacity	Timber end: 633 N/ 663 N; mortar end: 1466 N. Guidance for specification option: Timber end: As received/ 24 mm movement.
Dynamic stiffness	Type B.

Third party accreditation	UKCA marked.
Fixing	Guidance for specification option: For masonry end; insert requirements.
Cavity	50 mm.
Integral accessories	50 x 3.35 mm stainless steel annular ring nails. Guidance for specification option: Standard. 50 x 4.0 mm stainless steel screws for SIPS panels.

Sustainability data

Contains Red List materials	No
Country of product manufacture	United Kingdom
Recyclability	Recyclable
Recycled content As defined in clause 7.8 of BS EN ISO 14021	0 %