NBS Source
List your products
Application

Suitable for loading bays, factories, warehouses and any applications where security is required, and representing a reliable and efficient closure for most applications.

Description

Steel roller shutters, which are operated via a three-phase electric motor. Roller shutters provide a virtually unobstructed opening and, when open, the shutter and mechanism are out of the way above the doorway, and clear of any risk of damage from vehicles moving through the opening. The doors are robust and have a long life, with little maintenance required.

Features and benefits:

  • Curtain: constructed from 76 mm curved section galvanized steel laths, with pressed steel end locks fitted to alternate laths to prevent lateral movement. End plates are fitted where excessive windloads are specified. The bottom rail is a galvanized steel inverted 'tee' section.
  • Guides: the side guides are formed from galvanized steel channels, and prepared for fixing to the opening structure by means of continuous fixing angles.
  • End plates: fabricated from carbon steel of adequate thickness relative to door size, and supplied with angles for fixing to the structure.
  • Roller: the roller is manufactured from carbon steel tube of sufficient diameter and wall thickness to resist deflection, and is mounted on bearings or in cups on each end plate.
  • Operation: electrical operation is by means of a direct-drive, 400 V, three-phase geared motor mounted on the outside of one end plate. The motor has an inherent safety brake, thus meeting all relevant health and safety requirements, and the standard unit is pre-wired to obviate the need for a site electrician.
  • Controls: the standard controls are by means of 'open/ close/ stop' push-buttons fitted adjacent to the shutter.
  • Casings: coil casings fabricated from galvanized steel sheet are available as an optional extra.

Applications:

Suitable for loading bays, factories, warehouses and any applications where security is required, and representing a reliable and efficient closure for most applications.

General information
Size

Bespoke; consult manufacturer for details and insert requirements.

Finish

Galvanized

Standard.

Polyester powder-coated, RAL

Optional.

Stainless steel

Optional.

Uniclass 2015 Roller shutters (Pr_30_59_84_73)
Specification data
Product Reference

Three Phase Electric Roller Shutters

Size

Bespoke; consult manufacturer for details and insert requirements.

Finish

Galvanized

Standard.

Polyester powder-coated, RAL

Optional.

Stainless steel

Optional.

Laths -
Size

51 mm flat lath

For smaller openings.

76 mm curved

Traditional.

102 mm flat laths

For industrial and exposed locations.

Design

Perforated

Punched

Accessories/ Other requirements

None

Building management system (BMW) linkage

Card reader

Facias

Galvanized steel coil casing

Hood

Loop detectors

Photocell

Standard product features

Weight:

Dependent upon the size and lath configuration, but typically 35 kg/m².

Product Options

Finish:

The majority of parts are galvanized, with other parts being prime-painted. Also available in stainless steel and polyester powder-coated in a range of standard RAL colours at extra cost.

Similar products from Bolton Gate Company