Teknocem HB50
Application

For the structural repair, rendering and profiling of vertical, horizontal and overhead surfaces.

Description

Single component cementitious mortar which incorporates the most advanced cement chemistry, microsilica, fibre and styrene acrylic copolymer technology. This results in a rapid hardening, low density, high strength mortar with enhanced polymer properties. The thixotropic nature of the product enables easy high build trowel application. It is supplied as a single component system ready for on-site mixing and use, requiring only the addition of clean water.

Features/ Benefits:

  • Pre-packaged material requiring mixing with clean water on-site to give an easily trowellable mortar with application thickness of 80 mm in vertical, horizontal and overhead situations.
  • High bond strength exceeds tensile strength of concrete, thus ensuring monolithic performance of the repair.
  • Dense matrix offers low permeability to water, even at 10 bar pressure, and very high diffusion resistance to acid gases and chloride ions.
  • Improved tensile and impact strength.
  • Excellent low sag properties.
  • Economic mortar generally requiring no substrate or inter-layer priming. Part bags can be mixed.
  • Easily over-coated with specialist membranes to provide further protection and aesthetic quality.

Applications:

For the structural repair, rendering and profiling of vertical, horizontal and overhead surfaces.

Priming:

Highly porous substrates should be primed with Teknoprime 842.

General information

Uniclass 2015

Pr_20_31_53_15 Concrete repair mortarsPrimary

CAWS

C42/310 Repair mortar

Specification data - Concrete repair mortars Enhanced data

Product Reference

Teknocem HB50

Standard product features

Application thickness:

5–80 mm.

Technical properties:

  • Density (mixed): 1725 kg/m³.
  • Application temperature: 5–40°C.
  • Compressive strength: 48 MPa (28 days).
  • Water permeability (Taywood Test): 6 x 10ˆ-15 m/sec.
  • Oxygen diffusion co-efficient (Taywood Test D02): 2.72 x 10ˆ-4 cm²/sec.

Similar products from FIS Products