NBS Source
I'm a manufacturer

System 17 Latitude Curtain Walling

Verified by manufacturer 9 months ago

Metal Technology Ltd Third party certifications:
  • CWCT Certificate

    CWCT Certificate

    Certificate type

  • EPD

    EPD

    Certificate type

  • ISO 45001 Health and Safety Management

    Certificate type

  • ISO 9001 Quality Management

    Certificate type

A system developed to emphasize the horizontal aesthetic of the curtain walling façade.

Jump to:
+44 (0)28 9448 7777 Website

Application

For use on expansive high-rise glazed applications.

Description

Curtain walling developed for horizontal emphasis. The mullion sections can be installed at 3 m plus centres exhibiting a narrow, flush, vertically pointed glass to glass joint. Transom sections are capped with a range of 50 mm wide face caps to emphasize the horizontal lines of the external structural grid; subject to the structural sections being designed to accommodate the applicable loads in accordance with the relevant site conditions and application.


Features and benefits:

  • All windows/ screens, in conjunction with a suitable glazing specification, have been designed to meet the current requirements of Building Regulations.
  • Weathertightness: To BS 6375-1: 1989 and BS 5368.
  • Air permeability: 600 Pa.
  • Water resistance: 600 Pa.
  • Wind resistance: 2400 Pa.
  • Dynamic Test: In accordance with the CWCT sequence B test regime using a representative two storey test sample.
  • Static Air Permeability: <1.5 m³/hr at 600 Pa.
  • Static Water Penetration: Zero ml at 600 Pa.
  • Dynamic Water penetration: Zero ml at 600 Pa.
  • Structural performance: 2400 Pa (140 mph).
  • Safety Gust Performance: 3600 Pa (210 mph).
  • All structural profiles can be designed so that maximum deflection of any member shall not exceed L/200 of its span, with no evidence of any permanent deformation once the load has been removed. All transom sections are designed to limit their horizontal deflection to a maximum of 3 mm.
  • A concealed/ frameless top hung open out vent can be incorporated. Door systems may also be incorporated with visible frames. Consult with Metal Technology for recommendations and details.
  • Stick system, pressure equalized and mullion drained. The system is thermally broken throughout by means of a continuous thermal isolator located between the external pressure plates and internal framing members. No pressure plates or face caps are deployed externally on the vertical mullion joints. However, where site conditions and transom centres exceed the glass deflection limitations, additional intermediate pressure disc fixings are employed to secure the vertical edges of the double glazed units to the structural mullions.
  • Silicone bonded 32 mm to 36 mm double glazed units, dual sealed, with UV stable, silicone compatible, edge sealant and black anodized spacer bars. All exposed edges of the double glazed units are ground and arrissed. The vertical edges of the double glazed units are opacified by a dot matrix screen print to prevent read through of edge seal and spacer bar detail.
  • Dry glazed using proprietary, high performance captive gaskets. All gaskets are bonded and sealed during construction, using waterproof adhesive. All internal gaskets have pre-moulded vulcanized corners. All double glazed units are supported continuously along all four edges by an internal structural member and held firmly in position by means of a screw fixed pressure plate with a snap on face cap to the horizontals only. Vertical mullion joints are silicone pointed, and where applicable gasketed, to provide a 22 mm wide, flush glass to glass joint.

General information

Color

Beige

Black

Blue

Bronze

Brown

Show more

Finish

Powder-coated

Guidance for specification option:

Gloss, Matt or Satin finish.

Anodized

Guidance for specification option:

Metallic finish.

Material

Aluminium

Shape

Other

Length

Bespoke

Width

Bespoke

Height

Bespoke

Uniclass

Ss_25_10_20_85 Stick curtain walling systemsPrimary

CAWS

H11/110 Curtain walling

Specification data - Stick curtain walling systems

Framing

-

Frame members

Stick form.

Frame accessories

Horizontal pressure plates and cover caps.

Fasteners

Thermally broken.

Guidance for specification option:

Thermally enhanced pressure plates and fixing brackets with A2 or A4 austenitic stainless steel fixing screws

Cladding units

-

Glass units

Externally glazed, can accommodate glazing units from 32–36 mm.

Guidance for specification option:

Dry glazed gasket system. Vertical mullion joints silicone pointed externally.

Glazing accessories

Bespoke push-in gasket.

Cover caps.

Panels and facings

-

Material

Extruded aluminium alloy.

Guidance for specification option:

Aluminium profiles are extruded from aluminium alloy 6060T6, T5 or T4 complying with the recommendations of BS EN 12020-2 / BS EN 755 Parts 1 to 9.

System accessories

Frameless vent.

External cover cap

Gasket pointed vertical joints between glazed panels.

Gasket pointed horizontal joints between glazed panels.

Silicone pointed vertical joints between glazed panels.

Silicone pointed horizontal joints between glazed panels.

Aesthetic snap on aluminium cover caps running horizontally across the screen.

Guidance for specification option:

Consult manufacturer and insert requirements.

Materials

Extruded aluminium.

Guidance for specification option:

Silicone pointed.

Finishes

To BS EN 12373-1, Anodized.

To BS 3987, Anodized.

To BS 6496, Powder organic coated.

To BS EN 12206-1, Powder organic coated.

Manufacturer guidance

Consult with Metal Technology for availability of colours and to obtain samples.

Panel/ facing type

Guidance for specification option:

A variety of panel thicknesses can be accommodated within the system. Consult with Metal Technology for recommendations and details.

Thickness

-

Manufacturer guidance

A variety of panel thicknesses can be accommodated within the system. Consult with Metal Technology for recommendations and details.

Film thickness

-

Manufacturer guidance

Consult with Metal Technology following choice of finish.

Air permeability

To BS 6375-1: 1989, BS 5368, 600 Pa.

Watertightness

To BS 6375-1: 1989, BS 5368, 600 Pa.

Wind resistance

To BS 6375-1: 1989, BS 5368, 1200 Pa.

Sustainability data

Contains Red List materials

No

Country of product manufacture

United Kingdom

Embodied carbon

A1-A3 (production stage) as defined in BS EN 15804

2.69 kg CO₂ eq/m

Guidance for specification option:

Aluminium billet options available 1.9kg CO2e/kg Al and 4.0kg CO2e/kg Al

Manufacturer guidance

Aluminium billet options available 1.9kg CO2e/kg Al and 4.0kg CO2e/kg Al

Third party certifications

Third party certifications

CWCT Certificate

CWCT Certificate

CWCT Membership

EPD

EPD

Environmental Product Declaration - Curtain Walling

ISO 45001 Health and Safety Management

ISO 45001 Health and Safety Management

ISO 45001 : 2018

ISO 9001 Quality Management

ISO 9001 Quality Management

ISO 9001 : 2015

Literature

System 17 Latitude Curtain Walling

System 17 Latitude Curtain Walling

Similar products from Metal Technology Ltd

System 17 High-Rise Curtain Walling

System 17 High-Rise Curtain Walling

System 17 Roof/ Sloped Curtain Walling

System 17 SP Silicone Pointed Curtain Walling

System 17 SP Silicone Pointed Curtain Walling

System 17-65 High Rise Capped Curtain Walling

System 17-65 High Rise Capped Curtain Walling

System 17-65 SP Silicone Pointed Curtain Walling

System 17-65 SP Silicone Pointed Curtain Walling

System 17Hi+ High Rise Curtain Walling (Passivhaus) - Stick curtain walling systems

System 17Hi+ High Rise Curtain Walling (Passivhaus) - Stick curtain walling systems

System 8 Low-Rise Curtain Walling

System 8 Low-Rise Curtain Walling