A4 (1.4401  grade) austenitic stainless steel anchor and nylon plug.
A4 (1.4401  grade) austenitic stainless steel anchor for fixing aluminium rainscreen brackets to brick, block, concrete, masonry and sandstone.
The SXR fastener is 10 mm in diameter and has a 13 mm hexagon head with wide flange for greater load bearing, the sleeve only requires 50 mm embedment reducing drilling time.
Nylon plug design benefits include:
Approved for installation into:
To ensure the best performance of the product within the substrate discussion with SFS is recommended prior to calculating facade loads. Depending on the application a physical pull test on site may be required to confirm these loads.
SXR stainless steel anchor is ETA approved (ETA number 07/0121) and are CE marked. Technical performance in terms of tensile and shear are all documented in the ETA to enable the engineer to determine safe working loads in accordance with EuroNorms.
Fire Resistance test certification R90 for fastening of facade systems, see ETA.
[Material, Consult manufacturer for suitability with swimming pool applications]
Plug manufactured from high quality polyamide
Concrete anchor manufactured from A4 (1.4401  grade) austenitic stainless steel and are therefore suitable for all corrosivity categories; C1–C5 as defined in BS EN 12944
Stainless steel: Grade 1.4401 (316)
H20/10 Sheet cladding
H20/150 Sheet cladding
H20/155 Sheet cladding
H92/120 Rainscreen cladding
SXR - A4
Standard product features
On-site pull out testing recommended.
Consult manufacturer for suitability with swimming pool applications.