SUPALUX® - Fire Protection to Partitions - Non-combustible Calcium Silicate Board
Verified by manufacturer 2 months ago
SUPALUX® - Partitions - Internal Partition - 6 mm thick
SUPALUX® - Partitions - Internal Partition - 6 mm thick
Certifire Certificate
Certificate type
Fire protection to internal partitions.
Application
Provide fire protection to partitions
Description
Promat SUPALUX is a non-combustible calcium silicate board reinforced with selected fibres and fillers which can be used for fire protection of internal partitions.
Fire resisting walls used for partitioning buildings and enclosing compartments will be required to provide a barrier to the passage of fire from one side or the other and must therefore be also to satisfy each of the relevant criteria (integrity, insulation and if the wall is loadbearing - the loadbearing capacity).
Features and benefits:
- Boards can be installed before the building is watertight and are suitable for areas where the humidity is up to 85%.
- 30–240 minutes' fire resistance.
- 30 plus years' proven performance.
- High temperature environments (up to 80°C).
- Slim constructions.
- Multiple applications.
- Early installation for faster build.
General information
Color | White Guidance for specification option: Off-white. |
Finish | Smooth Manufacturer guidancePromat SUPALUX® has a smooth sanded surface on one face with a lightly textured reverse face. |
Material | Calcium silicate Guidance for specification option: A non-combustible calcium silicate board reinforced with selected fibres and fillers. It is formulated without inorganic fibres and does not contain formaldehyde. |
Shape | Rectangle |
Length | 2440 mm 2500 mm |
Width | 1220 mm 1250 mm |
Height | 6 mm 9 mm 12 mm 15 mm 20 mm |
Warranty description | Manufacturer guidanceEtex Building Performance Limited warrants that our passive fire protection products and component parts, when installed in the building originally designed, built and unaltered in accordance with the conditions and procedures set out in Promat Passive Fire Protection Handbook, this specification document and associated CAD drawings; and any specific technical recommendations made in relation to the above project, shall be durable and free from defects due to faulty manufacturing or factory workmanship. The system must be installed by a 3rd party accredited fire protection contractor, and where included in the specification, solely with proprietary products and components as supplied by Etex Building Performance Limited. The scope of this warranty will be dependent on the application and the environment in which the products are being installed. |
Uniclass | |
CAWS | K11/885 Fire protection board P12/310 Boards |
Specification data - Fibre-reinforced calcium silicate fire protection boards
Standard | To BS EN 1364-1: 2015. |
Fire rating | To BS EN 13501-1, Class A1 non-combustible. |
Density | 950 kg/m².Guidance for specification option: Approx. dry density. |
Thickness | 6 mm. |
Edges | Square. |
Colour | Off-white. |
Third-party certification | Certifire Certificate CF 420A. |
Frame | Horizontal sheeting rail, top hat sections, galvanised angle. Guidance for specification option: (Various dimensions dependent on partition selected). Steel stud, ceiling and floor channel. Guidance for specification option: (Various dimensions dependent on partition selected). Timber studs, timber noggins. |
Insulation thickness (minimum) | Stone wool insulation thickness. Guidance for specification option: Density varies (dependent on partition type selected). |
Fillet strips | Not required. Promat SUPALUX® fillet. Guidance for specification option: (Various dimensions dependent on partition type selected). |
Inner layer | Guidance for specification option: Promat SUPALUX® (various thicknesses dependent on partition type selected). |
Face layer | Manufacturer guidancePromat SUPALUX® (various thicknesses dependent on ceiling type selected). |
Fasteners | M4 self tapping screws and M6 anchor bolts. M4 Wood screws and M6 steel anchors. |
System accessories | PROMASEAL® Intumescent Sealant. |
Fire protection | EI30 to EI120 minutes. Guidance for specification option: SUPALUX® conversion of external wall to internal and SUPALUX® timber stud partitions. E120 to E240 minutes and EI15 minutes. Guidance for specification option: SUPALUX® external walls further than 1 m from the relevant boundary. EI60 to EI120 minutes. Guidance for specification option: SUPALUX® shaftwall partitions. EI30 to EI240 minutes. Guidance for specification option: SUPALUX® solid partitions and SUPALUX® steel stud partitions. |
Substrate | Solid or structural wall/ floor. Guidance for specification option: Provides at least the same fire performance as required from the Promat SUPALUX® system. |
Moisture | Humidity up to 85%. Guidance for specification option: Boards can be installed before the building is watertight and are suitable for areas where the humidity is up to 85%. |
Board size | 2440 x 1220 mm. |
Type: | Concealed System Grid System. Guidance for specification option: Fire Protection to Partitions and External Walls - Conversion Of External Wall To Internal Wall and External Walls Further Than 1 m From The Relevant Boundary. Timber Stud Partition. Guidance for specification option: Fire Protection to Partitions and External Walls - Internal Partition. Steel Stud Partition. Guidance for specification option: Fire Protection to Partitions and External Walls - Internal Partition. Solid Partition. Guidance for specification option: Fire Protection to Partitions and External Walls - Internal Partition. Shaftwall System. Guidance for specification option: Fire Protection to Partitions and External Walls - Internal Partition |
Surface finish | Painted. Guidance for specification option: Painted, paint finishes should not compromise the surface spread of flame. Finishes should be applied in accordance with Promat TDS 056. Untreated. |
Third party certifications
Certifire Certificate
CF420A SUPALUX® Partitions