SUPALUX® Ceiling, Floors And Roofs

SUPALUX® Ceiling, Floors And Roofs

Promat UK Third party certifications:
  • QA Certificate

    QA Certificate

    Certificate type

Fire protection to ceilings and protected zones.

Jump to:
+44 (0)800 145 6033 www.promat.com
Application

Provide fire protection to timber floors and roofs, suspended and self-supporting ceilings.

Description

Promat SUPALUX is a non-combustible calcium silicate board reinforced with selected fibres and fillers which can be used for fire protection of ceilings and protected zones.

New ceiling lining: Timber floor constructions should normally be tested or assessed in accordance with BS 476-21 and are required to satisfy the three failure criteria of loadbearing capacity, integrity and insulation when exposed to fire for below.

Application:

Provide fire protection to timber floors and roofs, suspended and self-supporting ceilings.

General information

Finish

Painted, paint finishes should not compromise the surface spread of flame

Finishes should be applied in accordance with Promat TDS 056.

Untreated

Size

Features

Boards can be installed before the building is watertight and are suitable for areas where the humidity is up to 85%. 30 - 240 minutes fire resistance, 30 plus years proven, performance, High temperature environments (up to 80°C). Slim constructions, Multiple applications, Early installation for faster build

Material

A non-combustible calcium silicate board reinforced with selected fibres and fillers. It is formulated without inorganic fibres and does not contain formaldehyde

Shape

Square profile

WarrantyDescription

Etex Building Performance Limited warrants that our passive fire protection products and component parts, when installed in the building originally designed, built and unaltered in accordance with the conditions and procedures set out in Promat Passive Fire Protection Handbook, this specification document and associated CAD drawings; and any specific technical recommendations made in relation to the above project, shall be durable and free from defects due to faulty manufacturing or factory workmanship

The system must be installed by a 3rd party accredited fire protection contractor, and where included in the specification, solely with proprietary products and components as supplied by Etex Building Performance Limited

The scope of this warranty will be dependent on the application and the environment in which the products are being installed

Uniclass 2015

Pr_25_71_52_24 Fibre-reinforced calcium silicate fire protection boardsPrimary

CAWS

K11/885 Fire protection board

K40/270 Boards

P12/310 Boards

Specification data - Fibre-reinforced calcium silicate fire protection boards

Product Reference

SUPALUX®

Fire Protection to Protected Zone

MASTERBOARD® SUPALUX®

Fire Protection to Self Supporting Ceilings Membranes (fire from below)

SUPALUX®

Fire Protection to Self Supporting Ceilings Membranes (fire from below or above - Integrity only)

SUPALUX®

Fire Protection to Self Supporting Ceilings Membranes (fire from below or above - Integrity and Insulation)

SUPALUX®

Fire Protection to Suspended Ceilings - Membrane Ceiling (fire from above or below)

SUPALUX®

Fire Protection to Suspended Ceilings - Protection to Steel Beams Concealed Grid

SUPALUX®

Fire Protection to Suspended Ceilings - Protection to Steel Beams Exposed Grid

SUPALUX®

Fire Protection to Suspended Ceilings - Timber floor (exposed grid system)

SUPALUX®

Fire Protection to Suspended Ceilings - Timber floor (concealed grid system)

SUPALUX®

Fire Protection to Timber Floors and Roofs - Fire From Above or Below

SUPALUX®

Fire Protection to Timber Floors and Roofs - New Ceiling Lining

SUPALUX®

Fire Protection to Timber Floors and Roofs - Timber Roof Voids

SUPALUX®

Fire Protection to Timber Floors and Roofs - Upgrading Existing Ceiling from Below

SUPALUX®

Fire Protection to Timber Floors and Roofs - Upgrading Existing Ceiling from Above

Standard

BS 476-21, BS 476–22

FireRating

Non-combustible with a reaction to fire Classification of A1 according to BS EN:13501-1

Thickness

6 mm

9 mm

12 mm

15 mm

20 mm

25 mm

Edges

Square

Certification

Certifire Certificate CF 420, BFTC Report 07/25 (Protected Zone)

Frame

'C' channel purlins

'C' channel purlins, perimeter steel angle

Fire rated exposed grid tee system and galvanised steel wire hangers fixed to beams using steel flange clips

Galvanized wire hanger

Hanger rod

MF5 ceiling sections, MF6 perimeter channel, MF7 primary support channel, MF8 strap hanger, MF9 connection clip

Timber joists (various dimensions dependent on floor type selected)

Insulation thickness (minimum)

Stone wool insulation thickness and density varies (dependent on floor type selected)

Fillet strips

Promat SUPALUX® fillet (various dimensions dependent on ceiling type selected)

Lining

-

Inner layer

Promat SUPALUX® (various thicknesses dependent on ceiling type selected)

Face layer

Promat SUPALUX® (various thicknesses dependent on ceiling type selected)

Fasteners

M4 self tapping screws

M4 self tapping screws, M6 expansion bolts

Non-combustible screws or plugs and anchors, Ejot Tec screws, drywall screws

Steel wood screws and Nails (dependent on ceiling type selected)

System accessories

PROMASEAL® Intumescent Sealant

Fire protection

Fire protection from above

Fire protection from below

Finish

Painted, paint finishes should not compromise the surface spread of flame

Finishes should be applied in accordance with Promat TDS 056.

Untreated

Moisture

Boards can be installed before the building is watertight and are suitable for areas where the humidity is up to 85%

Size

Insert requirements.

Standard product features

Colour:

Off-white.

Features:

Boards can be installed before the building is watertight and are suitable for areas where the humidity is up to 85%. 30 - 240 minutes fire resistance, 30 plus years proven, performance, High temperature environments (up to 80°C). Slim constructions, Multiple applications, Early installation for faster build.

Material:

A non-combustible calcium silicate board reinforced with selected fibres and fillers. It is formulated without inorganic fibres and does not contain formaldehyde.

Shape:

Square profile.

Size:

  • 2440 x 1220 mm - 6 mm, 9 mm, 12 mm, 15 mm (thickness),
  • 2500 x 1250 mm - 20 mm, 25 mm (thickness).

Warranty description:

Etex Building Performance Limited warrants that our passive fire protection products and component parts, when installed in the building originally designed, built and unaltered in accordance with the conditions and procedures set out in Promat Passive Fire Protection Handbook, this specification document and associated CAD drawings; and any specific technical recommendations made in relation to the above project, shall be durable and free from defects due to faulty manufacturing or factory workmanship.

The system must be installed by a 3rd party accredited fire protection contractor, and where included in the specification, solely with proprietary products and components as supplied by Etex Building Performance Limited.

The scope of this warranty will be dependent on the application and the environment in which the products are being installed.

Third party certifications
  • Certifire: Certificate CF 420
Similar products from Promat UK