STYCCOBOND F61 is a solution of synthetic rubber and resin in flammable solvents. The adhesive should be applied by fibre spreader or brush and combines quick drying with a long open time. It is suitable for use over normal underfloor heating installations and will withstand normal wet cleaning techniques. The formation of an ‘instant’ bond makes it particularly suitable for use on stairs and steps.

STYCCOBOND F61 can be used for securing PVC and rubber edgings, covings and nosings, floor and wallcoverings with backings of PVC, rubber cork and most textiles.

Refer to the F. Ball Recommended Adhesives Guide for details of specific floorcoverings and call Technical Services for details of wallcoverings.

STOPGAP waterproof surface membranes and sound flooring grade asphalt must be skimmed with a minimum of 3mm of the appropriate smoothing underlayment.

For details on other surfaces, contact our Technical Service Department.

On suitably prepared, very absorbent surfaces use a thin, uniform coat of STYCCOBOND F61 or STOPGAP P131.

General information

Uniclass 2015

Pr_20_31_02_80 Solvent-based synthetic rubber resin adhesivesPrimary


M50/10 Resilient floor tiling

M50/110 Resilient floor tiling

M50/150 Sheeting

M50/170 Carpeting

M50/190 Stair covering system

M50/20 Sheeting

M50/25 Carpeting

M50/70 Edgings and cover strips

M50/740 Edgings and cover strips

M50/750 Stair nosings and trims

M50/770 Skirtings

M50/80 Skirtings

M51/150 Carpeting for stairs

M51/510 Edgings and cover strips

Specification data - Solvent-based synthetic rubber resin adhesives

Product Reference

Styccobond F61

Product Options

Technical properties:

  • Colour - Pale Straw.
  • Consistency - Viscous Liquid
  • Coverage Rates - 2m2 per litre coating both surfaces
  • Open Time - 20 minutes

Similar products from Ball, F and Co Ltd