Rubber floorcovering adhesive.
STYCCOBOND F58 is an acrylic emulsion adhesive, which is designed to give a high bond strength and strong initial tack. It is protected against bio-degradation and is suitable for use over normal underfloor heating installations.
STYCCOBOND F58 can be used for securing a wide range of rubber sheet and tile floorcoverings.
See the F. Ball Recommended Adhesives Guide for details of specific floorcoverings.
STYCCOBOND F58 can be applied to STOPGAP smoothing underlayments, structurally sound, smooth, dry subfloors of concrete and sand/cement screed ,plywood, flooring grade chipboard and hardboard.
STOPGAP waterproof surface membranes, sound flooring grade asphalt and other non-absorbent surfaces must be skimmed with a minimum of 3mm of the appropriate STOPGAP levelling compound.
For details on other subfloors, contact our Technical Service Department.
Highly absorbent subfloors such as sand/cement screeds and plywood etc. may cause rapid drying of the adhesive, thus reducing the open time. Use STOPGAP P131 diluted4 parts of water and stir until thoroughly dispersed. Once applied this should be allowed to dry thoroughly before proceeding with the installation.
Dry and suitably prepared calcium sulphate screeds e.g. anhydrite must be primed with STOPGAP P121 - refer to STOPGAP P121 data sheet for further information
Cream / Yellow