Vinyl/PVC sheet and tile. Carpet sheet and tile acrylic flooring adhesive.
STYCCOBOND F44 is a solvent free acrylic emulsion adhesive, which is designed to give a high bond strength, strong initial tack and a long open time. It is protected against bio-degradation and is suitable for use over normal underfloor heating installations.
STYCCOBOND F44 can be used for securing vinyl sheet and tile floorcoverings toEN654, EN649 and EN651; rubber floorcoverings and some textile floorcoverings wit hPVC and polyurethane foam backings.
See the F. Ball Recommended Adhesives Guide for details of specific floorcoverings.
STYCCOBOND F44 can be applied to STOPGAP smoothing underlayments, structurally sound, smooth, dry subfloors of concrete and sand/cement screed, plywood, flooring grade chipboard and hardboard.
STOPGAP waterproof surface membranes and sound flooring grade asphalt must be skimmed with a minimum of 3mm of the appropriate STOPGAP smoothing underlayment.
For details on other subfloors, contact our Technical Service Department.
Highly absorbent subfloors such as sand/cement screeds and plywood etc. may causer apid drying of the adhesive, thus reducing the open time. Use STOPGAP P131 diluted4 parts of water stirred until thoroughly dispersed. This should be applied and allowed to dry thoroughly before proceeding with the installation.
Dry and suitably prepared calcium sulphate screeds e.g. anhydrite must be primed with STOPGAP P121 - refer to STOPGAP P121 data sheet for further information.
Cream / Yellow