Styccobond F41
Description

STYCCOBOND F41 is a solvent free acrylic polymer emulsion adhesive. It is designed to provide a permanently tacky film which prevents ‘loose-lay’ carpet tiles from moving under normal traffic but enables them to be lifted and replaced easily when required .It is non-flammable, is protected against biodegradation, is suitable for use over normal underfloor heating installations, is resistant to plasticiser migration and will with stand normal wet cleaning techniques.

STYCCOBOND F41 can be used for securing a wide range of dimensionally stable “lay flat” carpet tiles backed with bitumen/felt, non-woven fabric, PVC and other polymer backings.

See the Recommended Adhesives Guide for details of specific floorcoverings

STYCCOBOND F41 can be applied to STOPGAP smoothing underlayments, structurally sound, smooth, dry subfloors of concrete and sand/cement screed, plywood, flooring grade chipboard and hardboard.

STYCCOBOND F41 can also be applied to non-absorbent subfloors such as STOPGAP waterproof surface membranes, STOPGAP ISOLATOR, Raised Access Flooring Panels, Steel, Terrazzo, Granolithic, Linoleum and Vinyl floorcoverings.

Sound flooring grade asphalt must be skimmed with a minimum of 3mm of the appropriate STOPGAP smoothing underlayment.

For details on other subfloors, contact our Technical Service Department

Highly absorbent subfloors such as sand/cement screeds and plywood etc. may cause rapid drying of the adhesive, thus reducing the open time. Use STOPGAP P131 diluted4 parts of water and stir until thoroughly dispersed. This should be allowed to dry thoroughly before proceeding with the installation.

Dry and suitably prepared calcium sulphate screeds e.g. anhydrite must be primed with STOPGAP P121 - refer to STOPGAP P121 data sheet for further information.

General information

Color

White

Uniclass 2015

Pr_20_31_02_03 Acrylic and methacrylate adhesivesPrimary

CAWS

M50/130 Carpet tiling

M50/15 Carpet tiling

Specification data - Acrylic and methacrylate adhesives

Product Reference

Styccobond F41

Product Options

Technical properties:

  • Colour - White.
  • Consistency - Viscous Liquid
  • Coverage Rates - 8 - 22m2 per litre with a roller depending on the absorbency of the subfloor and the backing of the carpet tile.
  • Drying Time - 20 minutes

Digital objects
Platform Compatible Version Certified to
Revit

Revit 2017

4

2.0
IFC
-

4

2.0
Download now from NBS National BIM Library
Literature
Third party certifications
  • Quality Assurance - certficate : STYCCOBOND F41 has been tested to the standards of the International Maritime Organisation and approved for use in marine floor installations. USCG approval No. 164.112/1121/WCL MED0406.
Similar products from Ball, F and Co Ltd