Compare

Stravifloor Channel - Isolated Steel Floor Batten

Name: Stravifloor Channel - Isolated Steel Floor Batten
Brand: CDM Stravitec
SKU: cNy4cXVhWuy89yugbwnzqi

Verified by manufacturer 3 months ago

Pad - Channel + 47x47x30mm pad

CDM Stravitec

Third party certifications:

ISO 9001 Quality Management
Certificate type

An isolated steel floor batten system for the support of concrete or timber floating floors and sprung floor applications.

Jump to:

BOS

+44 1664 482486 Website

Application

For the support of concrete or timber floating floors and sprung floor applications typically used in:

Recording studios
Radio stations
Mechanical Equipment Rooms
Music Practice & Rehearsal Room
Event Space
Residential
Offices
Timber Construction

Description

Stravifloor Channel improves the structural stability of the floating floor and provides lower differential deflection resulting from live load or concentrated loads. It also allows for larger isolation pad spacing, which reduces material and installation costs, and increases acoustic performance through the optimization of pad loading and fewer contact points (transmission paths) to the subfloor.

Stravifloor Channel is a suitable choice to maximize noise insulation when an existing structure cannot support a heavyweight floating concrete slab.

Features and benefits:

Stravifloor Channel is available with four standard grades of resilient pads: Pad-M (medium stiffness), Pad-H (high stiffness) and Pad-X (extra high stiffness).
Standard resilient pad thicknesses are 30 mm and 50 mm (other thicknesses are available upon request).
In particular cases Stravifloor Channel is also available with springs as resilient support.
Stravifloor Channel can support a variety of formwork such as plywood, Oriented Strand Board (OSB) or cement bonded particle board (CBPB).
Stravifloor Channel steel components are electro-galvanized.
The standard range of resilient pads is available to provide load-bearing capacities from 0.1 to 3 MPa per pad.
Stravifloor Channel floor systems use elastomeric isolators with low stiffness/high resilience allowing natural frequencies as low as 6 Hz or springs allowing natural frequencies as low as 2.5 Hz.
The system is fast and easy installation, making it a very cost-efficient solution.
This system allows building services to be installed within the air void.
Light, strong, stable and robust.
Eliminate the risk of creaking or sagging of the floor, an effect that often occurs with girders made of natural materials such as wood as they get humid, dry up and expand/shrink.
CDM Stravitec pads, used as discrete resilient support of Stravifloor Channel, are durable and extremely low creep rate.

General information

Material	Steel Wood Chipboard Cement Cementitious Rubber Show more
Shape	Rectangle
Length	2000 mm Bespoke
Width	60 mm 80 mm Bespoke
Height	36 mm 56 mm 64 mm 89 mm Bespoke
Warranty description	Ten year

Uniclass	Pr_20_85_85_02 Acoustic and vibration resistant bearingsPrimary
CAWS	K11/27 Acoustic separating floor system K11/275 Acoustic separating floor system K11/295 Floating floor system

Specification data - Acoustic and vibration resistant bearings

Material	Steel and elastomer.
Dimensions	-
Height	36 mm.
Width	60 mm.
Load capacity	0.1–3 MPa per pad.
Requirements	The structural floor should comply with the required tolerances regarding the gradient (0.1% or 1 mm/m) and smoothness (max. 2 mm) prior to installation of the CDM Stravitec floating floor. The subfloor should be dry and clean of any debris (dust, dirt, grease, foreign objects) prior to installation.

Integral accessories	Perimeter strip, 10 x 50 x 10 000 mm. Perimeter strip, 10 x 100 x 10 000 mm. Perimeter strip, 10 x 150 x 10 000 mm. Perimeter strip, 10 x 200 x 10 000 mm.
Resilient layer	CDM Stravitec resilient pads, Pad-M (medium stiffness). CDM Stravitec resilient pads, Pad-H (high stiffness). CDM Stravitec resilient pads, Pad-X (extra high stiffness). Manufacturer guidance Four standard grades of CDM Stravitec resilient pads are available. The selection of the type of elastomeric pad must be done by the CDM Stravitec engineering team according to the load cases in operation phase as well as the type of application. The channel spacing, as well as the spacing between the pads, needs to be determined by the CDM Stravitec engineering team according to the floating floor thickness and the load cases in the operation phase.
Dimensions	Metal channels 60 x 2000 mm with pads 30 mm thick.
Floating floor	Concrete - 18 mm V313 chipboard formwork and 100 mm concrete. Concrete - 18 mm V313 chipboard formwork and 125 mm concrete. Concrete - 18 mm V313 chipboard formwork and 150 mm concrete. Panelized - 2no. 18 mm V313 chipboard. Panelized - 2no. 18mm plywood. Panelized - 18mm plywood, 2no. 12.5 mm cement board, 18 mm plywood. Show more
Acoustic insulation	Mineral wool, 20 mm. Mineral wool, 40 mm.
Standards	Acoustic test standard: Rw measured in accordance with ISO 10140-2:2021 and single figure ratings determined in accordance with EN ISO 717-1:2021. Ln,w and ∆Lw measured in accordance with ISO 10140-3:2021 and single figure ratings determined in accordance with EN ISO 717-2:2013.
Weighted sound reduction index, Rw	Up to 73 dB. Manufacturer guidance Consult manufacturer's literature and/or Stravi-dB (stravi-db.com) for detailed sound reduction index values.
Impact sound reduction	ΔLw: Up to 40 dB. Manufacturer guidance Consult manufacturer's literature and/or Stravi-dB (stravi-db.com) for detailed sound reduction index values.
System height	Minimum build-up height: 136 mm (wet/concrete system); 76 mm (dry/timber/cement boards system).
Air gap	36 mm (minimum).

Sustainability data

Contains Red List materials	No
Country of material origin	Europe
Country of product manufacture	Europe
Material	Steel Wood Chipboard Cement Cementitious Rubber Show more
Recyclability	- Manufacturer guidance The system components can be fully dismantled and reused as no glue is used.