Strata Self Adhesive – Reinforced Bituminous Membrane To Warm Roof – Flame Free
Verified by manufacturer 2 days ago
Flame free, self-adhesive reinforced bitumen membrane roofing system.
Application
Reinforced bituminous membrane roof waterproofing.
Description
Flame free, self-adhesive reinforced bitumen membrane roofing system.
STRATAPRO M SA is a multi-layer composite bitumen waterproofing membrane. The underside of the
membrane is made of SBS modified bitumen, while the upper layer is made of APP modified bitumen. The
SBS on the lower face offers a high level of flexibility and boasts elongation of up to 2000%. It will remain
flexible in temperatures as low as –25°c and has a high resistance to thermooxidative aging. The upper
layer consists of an elastoplastomeric mix of distilled bitumen, atactic and isotactic polypropylene and UV
resistant polyolefin elastomers, supplemented with thermal shock stabilisers. The membrane has a self
adhesive backing, consisting of a specially selected mix of Venezuelan bitumen, tackifying resins and
radial and linear elastomeric thermoplastic polymers.
The STRATAPRO M SA system provides a traditional felt system that can be used in areas where hot works are not permitted. It has been independently tested for Wind and Fire resistance with data proving the system can withstand wind forces of up to 5kPa and holds both EXT.F.ABand Broof(t4) fire resistance ratings.
Features and benefits:
- Safer, quicker and flame-free.
- Enables compliance with Safe2Torch guidelines.
- Independently tested for Wind and Fire resistance.
- BBA certified (BBA 18/5518).
System Includes:
- Stratapro M SA
- Stratabase SA
- Evatherm A rigid polyisocyanurate (PIR) insulation
- Instastik Adhesive
- Stratavap Air & Vapour Control layer
- Evaprime SA
- Deck by others
General information
Color | Grey |
Finish | Mineral |
Material | Bitumen |
Shape | Rectangle |
Length | 8000 mm |
Width | 1000 mm |
Height | 3 mm Guidance for specification option: Thickness |
Uniclass | |
CAWS | J41/110 Built-up reinforced bitumen membrane warm deck roof covering J41/10 Reinforced bitumen membrane warm deck roof covering |
Specification data - Reinforced bitumen membrane warm roof covering systems
Preparation | |
Horizontal work | Evaprime SA R.Guidance for specification option: A solvent based primer for bonding a variety of self-adhesive membranes and vapour control layers to a variety of substrates. Evaprime SA S.Guidance for specification option: A high-performance, solvent based primer for bonding a variety of self-adhesive membranes and vapour control layers to a variety of substrates. |
Skirtings and vertical work | Evaprime SA R.Guidance for specification option: A solvent based primer for bonding a variety of self-adhesive membranes and vapour control layers to a variety of substrates. Evaprime SA S.Guidance for specification option: A high-performance, solvent based primer for bonding a variety of self-adhesive membranes and vapour control layers to a variety of substrates. |
Air and vapour control layer | |
Type | Stratavap.Guidance for specification option: StrataVap is a self adhesive, 0.8 kg/m² elastomeric, polymer distilled bitumen membrane for use as an AVCL in roofs over high humidity spaces such as swimming pools and gymnasiums. The upper face consists of a glass fibre reinforced aluminium film, with the underside featuring a protected self-adhesive finish. |
Attachment | Self adhesive. |
Insulation | |
Type | Evatherm A Insulation, 1200 x 600 mm.Guidance for specification option: EvaTherm A is a high performance rigid polyisocyanurate (PIR) foam board for use in warm flat roofs under built-up felt, mastic asphalt and approved single-ply membrane waterproofing systems. EvaTherm A is a closed cell, CFC and HCFC-free (zero ozone depletion), rigid polyisocyanurate foam core faced, both sides, with a perforated mineral coated glass fibre tissue. It has an exceptionally low thermal conductivity of 0.025 W/mK. Thickness (mm) 25, 30, 40, 50, 60, 70, 80, 90, 100, 120, 130, 140, 150 mm. Consult literature and insert requirements. |
Fixing | Instastik.Guidance for specification option: INSTA-STIK Roofing Adhesive is a specially formulated polyurethane foam adhesive for the purpose of adhering rigid insulation boards to flat roofs. |
Waterproof covering | |
First layer | |
Type | Stratabase SA.Guidance for specification option: STRATABASE SA consists of thick elastomeric (SBS) distilled polymer-bitumen membrane, reinforced with a non woven composite polyester fabric and stabilised with fibre glass, offering high mechanical resistance and dimensional stability. The membrane has a self adhesive backing, consisting of a specially selected mix of Venezuelan bitumen, tackifying resins and radial and linear elastomeric thermoplastic polymers. The top face of STRATABASE SA is protected by a Flamina film, which makes it possible to join sheets using the self adhesive backing without any waste, no matter how the roll is cut. |
Attachment | Self-adhesive. |
Top layer | |
Type | Stratapro M SA.Manufacturer guidanceRoll size: 1 x 8 m. Thickness: 3 mm. |
Attachment | Self-adhesive. |
Detail work | |
Welted drips | Contractor to form suitably sized welted drip on site. |
System accessories | Ryno GRP Pultruded glass fibre reinforced polyester roof edge trim.Guidance for specification option: Installation: RynoTrim is fixed over the first layer of a built-up roofing system. The trim should be fixed at maximum 300 mm centres, using suitable fixings. Welted Drip.Guidance for specification option: Contractor to form suitably sized welted drip on site. Lead Flashing.Guidance for specification option: Created on site using suitable code lead and following the relevant codes of practice. FPA Profile.Guidance for specification option: Mechanically fixed to the wall 150 mm min. above finished roof level. Fixed at 200 mm centres using ICB approved fixings. Roof Vent.Guidance for specification option: Manufacturer: RYNO – Product of ICB (Waterproofing) Ltd. - Product reference: Ryno Breather Vent Diameter: 75 mm. Ryno Flat Flange Outlets Diameter: 50–150 mmGuidance for specification option: Manufacturer: RYNO – Product of ICB (Waterproofing) Ltd. - Product reference: Ryno Flat Flange Outlets Diameter: 50mm-150mm Ryno Horizontal Outlets Diameter: 65 / 100 mm.WalkwayGuidance for specification option: Product reference: Stratawalk Colour: Red. |
Sustainability data
Material | Bitumen |
Embodied carbonA1-A3 (production stage) as defined in BS EN 15804 | 0.05 kg CO₂ eq/unit Self declared |
Literature
ICB Waterproofing Strata Brochure
ICB Corporate Brochure
Technical Support Flyer - Why Choose ICB - Commercial
Technical Support Flyer - Why Choose ICB - Domestic
Similar products from ICB (Waterproofing) Ltd
Strata – Reinforced Bituminous Membrane For Green Roof To Warm Roof – Flame Free And Torch Applied
Strata – Reinforced Bituminous Membrane To Warm Roof – Flame Free And Torch Applied
Strata – Reinforced Bituminous Membrane To Warm Roof – Torch Applied