Stainless Steel Worktops - Straight

Worktop products are manufactured using 1 mm, 1.25 mm, 1.5 mm and 2 mm brushed-satin stainless steel of domestic grade (EN 1.4301) or alternatively, acid resisting grade for laboratories/ special environments (EN 1.4401) – the actual gauge is normally dependent on size of item. GEC Anderson stainless steel is highly durable, resilient to heat, fire and sustained heavy use and is aseptic (totally hygienic). It is 100% recyclable.

Areas of use:

  • Domestic and commercial kitchens, kitchenettes and tea points.
  • Bathrooms, washrooms, conveniences and utility rooms.
  • Laboratories, surgeries and specialist areas.
  • General spaces including restaurants, bars and passageways.

Finishes/ features:

Textured finish:

  • The raised pattern facilitates drainage, hides smudges and scratches and is just as easy to clean. Textured finish applies to entire work surface, excluding bowls. It is not available for L- shaped tops.
  • Size (maximum): 2400 x 1150 mm.

Brushed satin finish:

  • Can be used to produce tops in all shapes and sizes.
  • Available with a range of various edge details to suit the application.
  • The worktops can be made to measure in any shape or size, without joints, in one continuous flat (not sloping or fluted) surface.
  • Bowls and cut-outs for appliances can be positioned precisely where required by the installation design.

General information


Stainless steel to EN 1.4301

Stainless steel to EN 1.4401


Made to measure




2000 x 600 mm

Uniclass 2015

Pr_40_30_30_96 WorktopsPrimary


N10/200 Worktops

N11/20 Worktops

N11/340 Worktops

N12/320 Worktops

Specification data - Worktops

Product Reference

Made To Measure Stainless Steel Worktops


Stainless steel to EN 1.4301

Stainless steel to EN 1.4401

Finish/ Colour




As drawing ___

Any length available.


As drawing ___

Any width available.

Exposed edges

Edge 1

Watersafe back edge for tiling.

Edge 2

Watersafe side edge.

Edge 3

Watersafe front edge.

Edge 4

Anti-drip side/ back edge.

Edge 5

Anti-drip front edge.

Edge 6

Square back/ side up-stand.

Edge 7

Square front edge.

Edge 8

Square side/ back edge.

Edge 10

Back/ side up-stand.

Edge 10R

Back/ side up-stand.

HTM63 Edges

Bullnose front and back up-stand.

Inset Edge

Other requirements

Not required

As drawing ___

Cut-outs for appliances

Fixing and clearance for pipework

Product Options

Other requirements:

  • Cut-outs for appliances/ fittings; give details.
  • Special fixings and clearances for pipework – seek advice from GEC Anderson.

Digital objects
PlatformCompatibleVersionCertified to
Revit 2017 1 2.0
- 1 2.0
Download now from NBS National BIM Library
Similar products from Anderson, GEC Ltd