Stabilising Solution

A solvent-borne solution to stabilize chalking surfaces and to control suction on undecorated surfaces. For use on most exterior masonry surfaces and exterior grade building boards.


  • Sandtex Ready Mixed Masonry Filler - fill to cracks and small defects in masonry surfaces.
  • Sandtex Trade Fungicidal Wash - use to remove organic growth from surfaces.
  • Sandtex Trade Stabilising Solution - new porous, undecorated and chalking/powdery previously decorated surfaces.

General information

Uniclass 2015

Pr_35_31_65_50 Masonry stabilizersPrimary


M60/170 Masonry coating

M60/18 Special coating

Specification data - Masonry stabilizers

Product Reference

Sandtex Trade Stabilising Solution

Standard product features

Number of coats:

One liberal coat until suction, porous, friable or chalking surfaces are stabilized. Do not over stabilize.




  • Resin: Epoxy ester/ hydrocarbon.
  • Solvent: Dearomatised white spirit.

Drying time:

Recoatable after 16 hours under normal drying conditions.

Spreading rate:

Up to 6 m²/ litre on smooth surfaces. On textured and surfaces with suction the spreading rate may vary down to approximately 3 m²/ litre.

VOC Content:

EU limit value for this product (cat.A/h): 750 g/L (2010). This product contains maximum 599 g/L VOC.

Similar products from Sandtex Trade, product of Crown Paints Ltd