NBS Source
List your products
Application

  • Wall and floor tile products: earthenware, stoneware and fully vitrified stoneware tiles, ceramic split tiles and split tile fittings, clinker floor tiles, cast stone units, discolouration-resistant natural stone units. Use of Sopro MFK 446 flexible adhesive for marble tiles is recommended for discolouration-sensitive natural stone, e.g., crystalline marble (Carrara Bianco, Thassos, etc.). Sopro’s No.1 white rapid-set flexible tile adhesive is recommended for laying glass mosaic coverings.
  • For indoor and outdoor use.
  • For walls and floors.

Description

A white cementitious, flexible thin-bed adhesive for installation of ceramic wall and floor coverings and discolouration-resistant natural stone finishes. This tile adhesive meets C2 TE requirements to DIN EN 12 004, and offers good workability and high sag resistance. Suitable for use in conjunction with floor heating, flexible brush-on waterproof coatings and fully vitrified stoneware. Low-chromate to Regulation (EC) No 1907/2006, Annex XVII.

Features and benefits:

  • Meets C2 TE requirements to DIN EN 12 004.
  • Flexible.
  • For discolouration-resistant natural stone.
  • EMICODE system of GEV (German Association for Control of Emissions in Products for Flooring Installation): EC1PLUS R (‘very-low-emission-plus’) rating.
  • CE marked (CRP-DE2/0809.1.eng, EN 12 004:2007).

Applications:

  • Wall and floor tile products: earthenware, stoneware and fully vitrified stoneware tiles, ceramic split tiles and split tile fittings, clinker floor tiles, cast stone units, discolouration-resistant natural stone units. Use of Sopro MFK 446 flexible adhesive for marble tiles is recommended for discolouration-sensitive natural stone, e.g., crystalline marble (Carrara Bianco, Thassos, etc.). Sopro’s No.1 white rapid-set flexible tile adhesive is recommended for laying glass mosaic coverings.
  • For indoor and outdoor use.
  • For walls and floors.

Priming:

- Sopro GD 749 primer:

For use on calcium sulfate (anhydrite and self-levelling anhydrite) screeds to receive tiles with edge length not exceeding 60 cm and of size not exceeding 0.2 m², paperless gypsum wall panels, gypsum plasterboard/ joints and filler, gypsum fibreboard, gypsum plaster, high-or variable-suction (interior) aerated concrete; lime/ cement render, renders made from masonry cement, flush-jointed masonry.

- Sopro HPS 673 special primer:

For use on smooth and closed-pore substrates, e.g., existing tile, terrazzo, natural and cast stone coverings; adhesive residue from PVC flooring or carpeting; mastic asphalt screeds without sand blinding.

- Sopro MGR 637 multi-purpose primer/ Sopro EPG 522 epoxy primer:

For use on calcium sulfate-based (anhydrite and self-levelling anhydrite) screeds to receive tiles with edge length exceeding 60 cm or of size exceeding 0.2 m².

General information
Specification data - Cementitious adhesives
Product Reference

Sopro SC 809 Classic White Tile Adhesive

Standard product features

Technical characteristics:

  • Colour: White.
  • Coat thickness: 5 mm in compacted adhesive bed (maximum).
  • Application temperature: 5–30°C (maximum).
  • Coverage: Approximately 1.2 kg/m² per mm coat thickness.
  • Walkable/ grout-able: After 24 hours (approximately).
  • Loading: After three days (approximately). For underwater applications, commercial facilities and in conjunction with floor heating: After 28 days.
  • Reaction to fire: Class E.
  • Tensile adhesion strength after dry, water, heat storage and freeze-thaw cycles: ≥ 1.0 N/mm².

Similar products from SMET Building Products Ltd