NBS Source
List your products
Application

For dry interiors:

  • Shops.
  • Salesrooms.
  • Offices.
  • Foyers.
  • Car showrooms.
  • Exhibition spaces.
  • Salons.
  • Workshops.
  • Medical practices.
  • Cellar spaces.

Description

Sopro DFS ambiento® is a decorative, self-levelling, cementitious floor topping for the production of even, finished floor surfaces.

Features and benefits:

  • Heavy duty.
  • Extra hardwearing.
  • Rapid setting.

Applications:

For dry interiors:

  • Shops.
  • Salesrooms.
  • Offices.
  • Foyers.
  • Car showrooms.
  • Exhibition spaces.
  • Salons.
  • Workshops.
  • Medical practices.
  • Cellar spaces.

Suitable primer:

  • Sopro BH 869 construction resin (coverage: 250-300 g/m²).
  • Sopro EPG 522 epoxy primer (coverage 300-500 g/m²).
  • Sopro ESG 868 epoxy primer sealer (minimum coverage 1,000 g/m²).

Blinded to excess with Sopro QS 511 coarse silica sand. For calcium sulfate and self-levelling calcium substrate screeds, apply two coats of Sopro ESG 868.

Suitable substrates:

  • Cement and calcium sulfate screeds (heated/ unheated).
  • Concrete (minimum 6 months old).

Certification:

  • Low-chromate to Regulation (EC) No. 1907/ 2006, Annex XVII.
  • CE marked.

General information
Specification data - Self-smoothing levelling screed mixes
Product Reference

Sopro DFS ambiento®

Colour

Flannel Grey (965)

Silver (964)

White (963)

Standard product features

Technical characteristics:

  • Coat thickness: 5–15 mm.
  • Mixing ratio: 4.75–5.25 L water : 25 kg Sopro DFS.
  • Working life: 30­­­­­­­­­­­­­­­­­­­­­­­­­­–40 minutes.
  • Walkable: After 2–3 hours.
  • Fully loadable: After approximately 24 hours per 10 mm coat thickness.
  • Application temperature: 5ºC to 25ºC.
  • Coverage: approximately. 1.7 kg/m² per mm coat thickness.
  • Abrasion resistance (8 mm coat thickness): Able to accommodate loads from lift stackers and chair castors to EN 12529: Suitable for pneumatic and solid-rubber tyred vehicles.

Surface treatment:

Application of a protective finish is needed to protect against soiling and to achieve specific surface strengths or slip resistances.

Surface appearance:

Floor finish may appear cloudy, patchy and of varying colouration. It may exhibit marks left by treatment, sanding or pouring, streaks and shifting hues. Occurrence of small cracks in the toping cannot be ruled out. Such features do not constitute flooring defects.

Similar products from SMET Building Products Ltd