NBS Source
List your products
Sopro BSF 611 Paving Grout for Concrete Units
Application

Can be used for indoor and outdoor use in:

  • Flooring.
  • Garden and landscaped areas.
  • Linear structures such as roads and drainage channels (or vehicular pavements).
  • Roundabouts.
  • Hard landscaped areas e.g. marketplaces.

Use of Sopro PFM high-strength paving grout is recommended for natural stone segmental pavements. Sopro TNF natural stone grout with trass is recommended for grouting polygonal paving units. Consult manufacturer for details.

Description

Rapid-set, trass-bearing, cementitious grout for medium to heavy-duty concrete segmental pavements.

Features and benefits:

  • For 5–30 mm joint widths.
  • Suitable for grouting joints in concrete segmental pavements.
  • Resistant to suction sweeper loads, high pressure cleaning equipment and freeze-thaw cycles.
  • Early walkability and loadability.
  • Suitable for high-pressure water jetting.

Applications:

Can be used for indoor and outdoor use in:

  • Flooring.
  • Garden and landscaped areas.
  • Linear structures such as roads and drainage channels (or vehicular pavements).
  • Roundabouts.
  • Hard landscaped areas e.g. marketplaces.

Use of Sopro PFM high-strength paving grout is recommended for natural stone segmental pavements. Sopro TNF natural stone grout with trass is recommended for grouting polygonal paving units. Consult manufacturer for details.

General information
Uniclass 2015
Pr_20_31_53_60 Paving jointing mortarsPrimary
CAWS

M40/10 Natural stone covering to

M40/110 Tiling to

M40/115 Natural stone covering to

M40/5 Tiling to

Q25/110 Natural stone slab paving system

Q25/115 Natural stone slab paving overlay system

Q25/120 Concrete flag paving system

Q25/125 Concrete flag paving overlay system

Q25/130 Rigid brick paving system

Q25/135 Rigid brick paving overlay system

Q25/26 Stone slab paving

Q25/31 Concrete flag paving

Specification data - Paving jointing mortars
Product Reference

Sopro BSF 611 - Paving Grout for Concrete Units

Standard product features

Technical characteristics:

  • Colour: Grey (15).
  • Drying time: Maturing time: 3–5 minutes. Walkable: After 2–2.5 hours. Loadable: After 6 hours (approximately); by vehicular traffic after 3 days (approximately).
  • Suitability for high-pressure water jetting equipment: Up to 160 bar.
  • Flexural tensile strength: ≥7 N/mm².
  • Compressive strength: ≥30 N/mm².
  • Application temperature: 5–25°C (maximum).
  • Coverage: 15 kg powder per m² (approximately).

Similar products from SMET Building Products Ltd