Sopravap Stick Alu S 16

Third party certifications:

QA Certificate
Certificate type

Styrene-butadiene-styrene (SBS) modified bitumen self-adhesive vapour control layer membrane with composite aluminium reinforcement.

Jump to:

Application

For use as a self-adhesive vapour control layer for steel, timber and concrete decks.

Roll sizes of 14 x 1.08 m or 20 x 1.08 m available - consult manufacturer for details.

Description

A self-adhesive styrene-butadiene-styrene (SBS) modified bitumen membrane with an aluminium foil and non-woven polyester reinforcement. The upper surface has a sand finish and the lower surface is protected by a silicone release film.

The substrate should be primed with Elastocol 503 or Elastocol 600 - consult manufacturer for information.

Features and benefits:

Self-adhesive.

Cold applied.

Flame-free application.

Laid directly on to the deck.

CE marked to BS EN 13970.

Applications:

For use as a self-adhesive vapour control layer for steel, timber and concrete decks.

Roll sizes of 14 x 1.08 m or 20 x 1.08 m available - consult manufacturer for details.

General information

Finish

Upper side: Sand

Lower side: Silicone release film

Material

SBS (styrene-butadiene-styrene) modified bitumen with composite glass grid/ aluminium reinforcement

Uniclass 2015

Reinforced bitumen roofing sheets (Pr_25_57_08_75)

Specification data

Product Reference	Sopravap Stick Alu S 16

Standard product features

Material:
SBS (styrene-butadiene-styrene) modified bitumen with composite glass grid/ aluminium reinforcement.
Finish:
Upper side: Sand.
Lower side: Silicone release film.
Thickness:
1.6 mm (±5%).
Technical properties:
Reaction to fire: Class E.
Watertightness: Conforms.
Tensile force (to BS EN 12311-1): 900 N/ 50 mm.
Resistance to impact: 150 mm.
Shear resistance of joints: ≥500 N/ 50 mm.
Elongation at maximum tensile force (to BS EN 12311-1): 3%.
Resistance to tearing (nail shank, to BS EN 12310-1): 200 N.
Flexibility at low temperature (to BS EN 1109): -20°C.
Flow resistance at elevated temperature (to BS EN 1110): 100°C.
Dangerous substances: Complies (does not contain asbestos or tar constituents).

Literature

Flagon TPO Synthetic Waterproofing Systems

Flagon PVC Waterproofing Systems

Third party certifications

DoP: Certificate: WPBFR105