Single Component Cold Applied Liquid System for Warm Roofs - IKO Hybritech 1K PU - Waterproofing system

IKOpro Bonding Agent.

Guidance for specification option:

IKOpro Systems Bonding Agent (black) is a specially formulated primer. Enhancing the properties of self- adhesive bitumen roofing membranes, it promotes strong bonds even at temperatures as low as 5°C.

IKOpro Sprayfast MPP.

Guidance for specification option:

KOpro Sprayfast MPP (Black, Multipurpose Primer) is a

specially formulated high performance bonding primer.

It allows the speed of application of the bonding primer

to be five times faster than conventional bitumen primers,

promoting strong bonds at temperatures as low as

5°C. For self adhesive and torch applied bitumen membranes.

IKOpro Quick Dry Primer.

Guidance for specification option:

IKOpro Quick Dry Bitumen Primer (black) is a fast-drying bitumen priming solution for torch applied bitumen membranes.

Hybritech Bitumen Primer.

Guidance for specification option:

IKO hybritech Bitumen Primer is a white single-component water based primer with excellent penetration properties. 

IKOpro Bonding Agent.

Guidance for specification option:

for self adhesive bitumen membranes only

IKOpro Sprayfast MPP.

Guidance for specification option:

for self adhesive and torch applied bitumen membranes

IKOpro Quick Dry Primer.

Guidance for specification option:

for torch applied bitumen membranes

Hybritech Bitumen Primer.

Guidance for specification option:

IKO hybritech Bitumen Primer is a white single-component water based primer with excellent penetration properties. 

IKO Ultra S-A Air and Vapour Control Layer.

Guidance for specification option:

Self adhesive for combustible substrates

S-A VCL (Self-Adhesive) is a high performance vapour barrier for use in adhered IKO Polymeric systems. It is composed of a polyester reinforced aluminium core, coated with a rubber modified, self-adhesive bitumen coating. The membrane is protected on the underside with a release film backing and coated on the top surface with a fine mineral finish. A selvedge of 75mm width, protected with release film, provides a quick means of completing side laps.

IKO Ultra T-O Air and Vapour Control Layer.

Guidance for specification option:

Torch applied to non combustible substrates only

T-O VCL (Torch-on) is a high performance vapour control layer for use in adhered IKO Polymeric systems. It comprises an impervious aluminium core, reinforced with polyester and coated with a specially formulated quick melt SBS modified bitumen. The lower surface has a sacrificial film which rapidly melts during the torching operation.

Unilin FR MG Insulation, 1200 x 1200 mm.

Unilin TR MG Insulation.

IKOpro PU bonding adhesive.

IKOpro Sprayfast IBA.

IKO Ultra H-A Underlay.

Guidance for specification option:

IKO Systems H-A underlays are polyester reinforced bitumen membranes used as underlays within a built up roofing system, The membranes are coated on both sides with self-adhesive bitumen SBS elastomeric coating. They have a fine mineral upper surface with a 75 mm release film selvedge to facilitate rapid installation of lap joints. Size: 1 x 16 m.

Bonded by heat activation to primed insulation board (laps heat welded).

IKO hybritech waterproofing.

Guidance for specification option:

KO hybritech is a isocyanate free, solvent free and odour free single component coating based on flexible hybrid polymers. IKO hybritech cures through reaction with the air humidity.

IKO 110 sgm Polyester Fleece.