NBS Source
I'm a manufacturer

Single-Component Cold Applied Liquid System for Inverted Roofs - IKO 1K PU Hybritech - Waterproofing system

Verified by manufacturer 2 months ago

IKO Ireland

Single component, odour-free liquid waterproofing system.

Jump to:
+353 1 88 55 090 Website

Application

Inverted flat roof constructions.

Description

A solvent-free and odour-free single-component liquid waterproofing system based on flexible hybrid polymers. It cures through reaction with the air humidity and it is used as a fully reinforced waterproofing resin in the IKO Hybritech Liquid Waterproofing System.


Features and benefits:

  • Excellent durability and puncture resistance.
  • Highly flexible in design application, simplifying complex detailing.
  • Wet on wet application saves time.
  • Does not require a primer.
  • Suitable for most roof types.
  • IKO 20 year guarantee.
  • Approved contractor and installer application.
  • Consumption rate of min 2.5 kg/m².

General information

Color

Grey

Material

Polymer

Length

Bespoke

Width

Bespoke

Warranty description

20 year

Uniclass

Ss_30_40_30_42 Liquid-applied inverted roof covering systemsPrimary

CAWS

J31/12 Inverted roof coating

J31/130 Inverted roof coating

Specification data - Liquid-applied inverted roof covering systems

Preparation

-

Horizontal work

IKOpro Bonding Agent.

Guidance for specification option:

IKOpro Systems Bonding Agent (black) is a specially formulated primer. Enhancing the properties of self- adhesive bitumen roofing membranes, it promotes strong bonds even at temperatures as low as 5°C.

IKOpro Sprayfast MPP.

Guidance for specification option:

KOpro Sprayfast MPP (Black, Multipurpose Primer) is a

specially formulated high performance bonding primer.

It allows the speed of application of the bonding primer

to be five times faster than conventional bitumen primers,

promoting strong bonds at temperatures as low as

5°C. For self adhesive and torch applied bitumen membranes.

IKOpro Quick Dry Primer.

Guidance for specification option:

IKOpro Quick Dry Bitumen Primer (black) is a fast-drying bitumen priming solution for torch applied bitumen membranes.

Hybritech Bitumen Primer.

Guidance for specification option:

IKO hybritech Bitumen Primer is a white single-component water based primer with excellent penetration properties. 

Skirtings and vertical work

IKOpro Bonding Agent.

Guidance for specification option:

for self adhesive bitumen membranes only.

IKOpro Sprayfast MPP.

Guidance for specification option:

for self adhesive and torch applied bitumen membranes.

IKOpro Quick Dry Primer.

Guidance for specification option:

for torch applied bitumen membranes.

Hybritech Bitumen Primer.

Guidance for specification option:

IKO hybritech Bitumen Primer is a white single-component water based primer with excellent penetration properties. 

Carrier membrane

-

Type

Guidance for specification option:

IKO Systems H-A underlays are polyester reinforced bitumen membranes used as underlays within a built up roofing system, The membranes are coated on both sides with self-adhesive bitumen SBS elastomeric coating. They have a fine mineral upper surface with a 75 mm release film selvedge to facilitate rapid installation of lap joints. Size: 1 x 16 m.

Liquid-applied waterproofing

-

Type

IKO hybritech waterproofing.

Guidance for specification option:

IKO hybritech is a isocyanate free, solvent free and odour free single component coating based on flexible hybrid polymers. IKO hybritech cures through reaction with the air humidity.

Reinforcement

IKO Protection Fleece.

Guidance for specification option:

A reinforcement fleece consisting of non-woven polyester with a density of 110 g/m². This fleece is rolled out in the wet first layer of IKO metatech Detail and pressed in areas that are subject to heavy footfall. It therefore ensures the strength, stability and longevity of the system.

IKO 110 sgm Polyester Fleece.

Insulation

-

Type

Unilin XPS insulation board.

Ravatherm XPS insulation board.

Fibran XPS insulation board.

Water control layer

IKO enertherm WCL (Water control layer).

Ballast

IKO Paving supports and 50 mm paving.

50 mm ballast.

Colour

Dusty grey (RAL 7037).

Density

+/- 1,37g/cm³.

Guidance for specification option:

This relates to the waterproof coating layer.

Viscosity

+/- 6.500 mPas (25°C, 5 rpm, spindle 5).

Guidance for specification option:

This relates to the waterproof coating layer.

Hardness

+/- 80 (Shore A 23°C).

Guidance for specification option:

This relates to the waterproof coating layer.

TensileStrength

+/- 5 N/mm².

Guidance for specification option:

This relates to the waterproof coating layer.

Elongation

+/- 120%.

Guidance for specification option:

This relates to the waterproof coating layer.

Application temperature

Air temperature: 5°C - 35°C. Substrate temperature: 5°C - 30°C. Product temperature: 5°C - 30°C.

Manufacturer guidance

This relates to the waterproof coating layer.

Storage

6 months in the hermetically sealed packaging, when stored in a dry,
cool and frost-free place.

Guidance for specification option:

  • Keep the edges of the tin clean.
  • When closing the tin, place the lid and the lever lock ring in the correct way and remove any product that might remain on the tin.
  • Once opened, use the product within 1 month. A skin will form on top of the product that needs to be cut out and can't be mixed to the liquid product.

Manufacturer guidance

This relates to the waterproof coating layer.

Standards

To ISO 9001, ISO 14001.

Outlets

IKO Elite Outlets.

Sustainability data

Material

Polymer

Literature

Brochure - IKO PLC ESG Report July 2023

Brochure - IKO PLC ESG Report July 2023