Sikaflex® TS Plus - Elastic sealant
Verified by manufacturer over a year ago
Polyurethane elastic tank and silo sealant.
Application
- Internal and external use.
- Designed for sealing steel containers built in sections such as enamelled steel or stainless steel tanks.
- Sealing domestic sewage systems.
Description
A polyurethane, one-part, moisture curing, elastic sealant. Sikaflex® TS Plus provides a waterproof seal with good mechanical properties, is resistant to liquid manure, chemicals and remains elastic over a wide range of temperatures.
Features and benefits:
- Resistant to domestic sewage and liquid manure.
- Chemical resistant.
- Good mechanical properties.
- High modulus.
- Movement capability of ±15%.
Approvals/ standards:
- Chemical Resistance liquid manure, Sikaflex TS Plus, SKZ, Report No 69298/05-I.
- Chemical Resistance silage liquids, Sikaflex TS Plus, SKZ, Report No 69298/05-II.
- Migration Behaviour EN 1186, EN 13130, CEN/TS 14234, Sikaflex® TS Plus, ISEGA, Certificate No. 46763 U 18.
- Sewage Installations waste water, Sikaflex TS Plus, SKZ, Report No 36142/98.
- Silage Sikaflex TS Plus, DIBt, national technical approval No II 71-1.74.62-40/17.
General information
Color | Black Grey |
Material | Polyurethane |
Shape | Formless |
Uniclass | |
CAWS | R12/110 Below ground drainage system |
Specification data - Polyurethane (PUR) construction joint sealants
Material | One-part polyurethane. |
Colour | Black.Concrete grey. |
Density | To ISO 1183-1, ~1.25 kg/L. |
Shore A hardness | To ISO 868, ~40. Guidance for specification option: After 28 days. |
Tensile Modulus | To ISO 8339, ~0.75 N/mm². Guidance for specification option: At 100% elongation (+23 °C). Manufacturer guidanceSecant tensile modulus. |
Elongation at break | To ISO 37, ~750%. |
Movement | To ISO 9047, ±15%. Manufacturer guidanceMovement capability. |
Elastic recovery | To ISO 7389, ~80%. |
Tear resistance | To ISO 34, ~8.0 N/mm Manufacturer guidanceTear propagation resistance. |
Service temperature | Dry, -40 to +70°C; wet, ≤40°C (movement joints), ≤55°C (as overlap sealing in bolted steel tanks). |
Chemical resistance | Manufacturer guidanceConsult manufacturer for details. |
SAG | To ISO 7390, 0 mm. Guidance for specification option: 20 mm profile, 50°C. Manufacturer guidanceSag flow. |
Ambient temperature | 5–40°C. |
Temperature | 5–40°C. Guidance for specification option: Minimum +3°C above dew point temperature. Manufacturer guidanceSubstrate temperature. |
Backing | Use closed cell, polyethylene foam backing rod. Manufacturer guidanceBacking material. |
Curing time | ~2 mm/ 24 hours. Guidance for specification option:
Manufacturer guidanceCQP 049-2. |