Polyurethane based humidity hardening one-pack adhesive.
Polyurethane adhesive used to bond certain insulation boards on specific surfaces.
- PIR insulation boards (glass or mineral fibre fleece).
- Polystyrene (EPS).
- Mineral fibre boards with sufficient compressive strength and appropriate surface for bonding.
- Suitable substrates:
Primer 600 may be required in some instances this must be established by an adhesion test prior to installation
The substrate must be solid, clean, free of oil and grease, air-dry or slightly moist. Standing water must be dried off. Loose sand or grinds from bitumen membranes must be removed.
J42/10 Warm deck roof covering
Sika-Trocal C200 Adhesive
|Standard product features|
Clear to Light Yellow.