Sika AnchorFix®-2+ - Chemical Anchor Resin
Verified by manufacturer 5 months ago
Styrene-free anchoring adhesive for medium to high loads.
Application
As a fast curing anchoring adhesive for all grades of:
- Rebars / reinforcing steel.
- Threaded rods.
- Bolts and special fastening systems.
- Concrete (cracked and non-cracked).
- Solid masonry.
- Steel.
- Hard natural stone.
- Solid rock.
Description
Solvent and styrene-free, epoxy acrylate based, two-component anchoring adhesive for normal / moderate
climate conditions.
Features and benefits:
- Fast curing.
- Standard guns can be used for application.
- High load capacity.
- ETA to ETAG 001 for anchoring in concrete.
- ETA to ETAG 001 for rebar connections.
- Suitable for cracked concrete.
- Drinking Water certified.
- LEED Attestation available.
- Non-sag, even overhead.
- Styrene-free.
- Low odour.
- Low wastage.
- Suitable in wet / damp (but clean) holes.
- Appropriate for marine environments.
General information
Color | Grey Guidance for specification option: Mixed product: Grey. |
Shape | Formless |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Uniclass | |
CAWS | E42/330 Anchor bolts E30/240 Proprietary prefabricated reinforcement E30/250 Proprietary prefabricated continuity reinforcement strips E42/345 Anchor plates/ column shoes |
Specification data - Epoxy resin-based adhesives
Form | Solvent and styrene-free, epoxy acrylate based. |
Open time (minimum) | 4 minutes (25–30°C). |
Colour | Grey. |
CompressiveStrength | ~70 N/mm² (7 days, +20°C) (to ASTM D 695). |
Modulus of elasticity | ~7 000 N/mm² (7 days, +20°C) (to ASTM D 638). |
Flexural strength | ~29 N/mm² (7 days, +20°C) (to ASTM D 790). |
TensileStrength | ~15 N/mm² (7 days, +20°C) (to ASTM D 638). |
Modulus of elasticity | ~7 000 N/mm² (7 days, +20°C) (to ASTM D 638). |
Density | ~1.60–1.68 kg/L (component A+B mixed). |
Literature
Product datasheet
Sika Anchorfix 2+ safety datasheet
Sika anchorfix 2+ safety datasheet
Sika anchorfix 2+ technical document