A medium duty, single skin partitioning system.
Sigma is a fully demountable, relocatable single skin steel partitioning system designed and manufactured for factory, warehouse and storage applications where appearance is important. The system, of pressed channel frame construction is based on standard panels in full steel, steel and glass, steel and mesh and full mesh and comes complete with a range of door types and styles. All components are factory finished in epoxy powder coat. The system offers simple and quick installation.
Epoxy powder coated
This system combines a quality finish with flexible options of steel, mesh and glazed combinations within the panels to meet many requirements
Our warranty shall apply when the products supplied by Troax and installed in accordance with our standard installation instructions or by Troax installers and will be subject to assessment by a Troax representative if deemed to be required
|Wall/ Vertical structure|
Pressed channel section frame
Steel/ Glass/ Steel
Non-standard widths are available up to a maximum 1200 mm wide; insert requirements.
Epoxy powder coated
Grey BS 00A05
Grey RAL 7037
Sandstone BS 08B17
White RAL 9010
Blue RAL 5010
Exposed bolted panels and mullions
Half glazed from 1087–2373 mm above ffl
Glazed panel from 1087–2017 mm above ffl
6.4 mm single glazing
6 mm single glazing
Steel hinged single doors
Steel hinged double doors
Steel sliding doors
Timber hinged single doors
Timber hinged double doors
50 x 25 x 2.5 mm steel angle sections
Steel pressed box section
1000 x 2006 mm
Single leaf steel.
2000 x 2006 mm
Double leaf steel.
1000 x 2180 mm
2000 x 2180 mm
2400 x 2180mm
900 x 2023 mm
Single leaf timber.
1851 x 2023 mm
Double leaf timber.
Drop-down hatch with hinged flap
Sliding glass hatch
Ceilings and lights
|Standard product features|
Nominally 9 kg/m² excluding glass.
50 x 50 mm hollow section steel mullions to corners and junctions with 50 x 50 mm hollow section steel support mullions at 3000 mm centres, bolted to the floor with M10 countersunk expanding anchors.
Consult manufacturer for recommendations and details.
Non-standard heights and multi-tiered options are available.
Consult manufacturer for availability of alternative meshes and to obtain samples.
Partitions are available in a range of five standard colours, but non-standard and corporate colours to the nearest BS or RAL colour are available on request.
Steel 'clip-on' glazing beads accommodate any 6 to 6.4 mm thick glazing product.
Ironmongery options include: 3 lever mortise lock with lever handles, pull handle and push plate, mortise lock with euro profile cylinder, digital lock, claw lock for sliding doors and all doors can be padlockable.