ShieldTEC Inverted Roof Hotmelt Waterproofing System

ShieldTEC hot melt waterproofing system is a specially formulated combination of high quality bitumen, synthetic rubbers, lightweight fillers and other additives, which is hot-applied with carefully selected reinforcement fabrics and protection layers to give a monolithic waterproofing system.

Components:

• ShieldPRIME - A brush or roller applied bituminous priming solution for the preparation of cementitious surfaces to receive ShieldTEC monolithic membrane.
• ShieldTEC Monolithic Hot Melt - A hot applied specially formulated combination of refined polymer-modified bitumen, synthetic rubbers, fillers and other additives.
• ShieldFLEECE - A non-woven polyester reinforcement fleece with a nominal weight of 50 g/m² which is embedded between the two layers of ShieldTEC compound.
• ShieldTEC PS2 - Sanded roof access layer, ShieldTEC PS4 - Underlay or ShieldTEC PS5 - Mineral cap sheet or ShieldROOT M - Root-resistant protection membrane.

Features and benefits:

• Hot applied system.
• Suitable for completely flat (zero falls) decks.
• BBA Certified No. 17/5459.
• Outstanding durability – lasts the life of the building. Nominal system thickness of 10 mm.
• Tough and resistant to impact damage.
• High bond strength to substrate - High tensile strength.
• Monolithic application.
• Rapid setting – resistant to rain, snow and frost immediately after application.
• Fully bonded system – Non-tracking.