Security Shutter - Electrically Operated Roller Shutters (3 phase)

Metal roller shutters which have been designed to meet the demands of window/ door protection on commercial and domestic premises. Manufactured from high-quality extruded aluminium sections, the shutters are powder-coated white as standard, and are electrically operated by a tubular motor with a variety of controls available.

Features and benefits:

• Curtain: constructed from 76 mm curved section galvanized steel laths, with pressed steel end locks fitted to alternate laths to prevent lateral movement. End plates are fitted where excessive windloads are specified. The bottom rail is a galvanized steel inverted 'tee' section.
• Guides: the side guides are formed from galvanized steel channels, and prepared for fixing to the opening structure by means of continuous fixing angles.
• End plates: fabricated from carbon steel of adequate thickness relative to door size, and supplied with angles for fixing to the structure.
• Roller: the roller is manufactured from carbon steel tube of sufficient diameter and wall thickness to resist deflection, and is mounted on bearings or in cups on each end plate.
• Operation: electrical operation is by means of a direct-drive, 400 V, three-phase geared motor mounted on the outside of one end plate. The motor has an inherent safety brake, thus meeting all relevant health and safety requirements, and the standard unit is pre-wired to obviate the need for a site electrician.
• Controls: the standard controls are by means of 'open/ close/ stop' push-buttons fitted adjacent to the shutter.
• Casings: coil casings fabricated from galvanized steel sheet are available as an optional extra.