SC804 Intumescent Steel Coating - On-Site, Water Based
Verified by manufacturer over a year ago
On-site, water based intumescent steel coating.
Application
SC804 is optimised to provide 90 minutes of fire resistance to ‘I’ section beams, columns, hollow columns and hollow beams as well as cellular beams. Limited 120-minute protection is also available.
Description
A water based, white, thin film intumescent coating for the protection of internal structural steelwork. It was developed to give optimised loadings for 90 minutes, and up to 120 minutes fire resistance.
Features and benefits:
- Ultra-Low VOC.
- Competitive loadings.
- Compatible with a wide range of primers and topcoats.
- Excellent aesthetics.
- Optifire®+ unique traceability identifier.
- Meets BS 476-20 and -21, ETAG 018 and Cellular beams YB5.
- Building classification: C1, C2 and C3 environments only.
Top seal:
Once DFT's have been achieved as specified, a Nullifire topcoat can be applied. Ensure the product is completely dry before applying a topcoat. For approved topcoat products, consult the manufacturer.
General information
Color | White |
Finish | Matt Guidance for specification option: The product can be applied to a smooth matt finish. A compatible top-seal can be applied if a decorative finish is required. |
Material | Water-based |
Uniclass | |
CAWS | M61/115 On-site coating to galvanized steel M61/110 On-site coating to primed steel M61/120 On-site coating to existing steel M61/140 On-site overcoating to existing steel |
Product range |
Specification data - Intumescent protective coatings
Composition | A very low VOC, water-based formulation. |
Colour | White. |
Product Reference | SC804 |
VOC content | <0.1 g/L. |