BBA Agrément Certificate
PVC-P single-ply membrane with a self-adhesive polyester fleece on the underside, for adhered applications.
PVC-P single-ply membrane for adhered warm roof systems.
Sarnafil G membranes are manufactured using a state-of-the-art extrusion coating process that eliminates shrinkage and plastic memory and produces a dynamically stable membrane. In the coating process, a glass fibre carrier is coated on both sides with liquid Plastisol, prior to the application of a lacquer coating on the upper surface and laser marking of the membrane surface for identification. The unique lacquer coating eliminates the need for biocides, provides the membrane with an easy-to-clean surface and prolongs the life of the membrane by reducing plasticizer loss.
Certified by BBA, in their opinion, to have a 'life expectancy in excess of 40 years' for exposed applications, with periodic maintenance as stated below:
'A planned maintenance cycle, including inspections by the Certificate holder at minimum intervals of five years, should be introduced if an extended service life is required. The Certificate holder can advise on methods of extending the service life. This could include the use of thicker membranes, specific maintenance requirements or localised replacement and repair'.
Should the maintenance cycle not be followed, Sarnafil G/S membranes have been given, in the opinion of the BBA, a life expectancy of 'in excess of 35 years'.
Sarnafil G410-EL FSA is adhered directly to the previously primed (Primer 600 or Spray Primer 610) substrate, or a suitable thermal insulation board, using the self-adhesive backing. Laps are then hot air welded to form seams which are stronger than the membrane itself.
Installation is carried out by Sarnafil trained contractors.
J42/10 Warm deck roof covering
J42/110 Warm deck roof covering
J42/130 Cold deck roof covering
J42/400 Waterproof membrane
Sarnafil G410-EL FSA
Sarnafil Constant Force post
Sarnafil heat weldable lightning conductor clips
Spray Primer 610
Double L rainwater outlets
G/S rainwater outlets
|Standard product features|
1.5 mm + felt.
Length of roll:
1.5-mm thick: 2.30 kg/m².
G410-EL Adhered Cold Roof System
G410-EL Adhered Roof System - Sarnavap 1000E
G410-EL Adhered Roof System - Sarnavap 5000E SA
G410-EL Adhered Roof System - Sarnavap 500E
G410-EL Adhered Roof System – Sarnavap 500E
G410-EL Ballasted Roof System - Sarnavap 1000E & S-Felt T 300
G410-EL Ballasted Roof System - Sarnavap 1000E & Sarnafil G445-13
G410-EL Ballasted Roof System - Sarnavap 5000E SA & S-Felt T 300