Application

The product should be used on cleaned, horizontal concrete or asphalt floors. Typical uses are manufacturing, packaging and warehousing areas subjected to heavy foot and pallet truck traffic, and where a degree of flexing of the floor is expected. Use RUST-OLEUM 5401 or 5421 Impregnation primer on porous mineral substrates. Use RUST-OLEUM B95SL – diluted with 20% Thinner 641 – on asphalt floors. On dense surfaces, apply a coat Rust-Oleum 3333 or 3366.

The product is not colour-fast and may change colour over time (exhibits a yellowing effect).Colour change depends on the UV light and heat levels present, hence the rate of changecannot be predicted.

Description

High-build, solvent-free, self-levelling, flexible and durable polyurethane cast floor.

Features and benefits:

  • Seamless, smooth, industrial finish.
  • Excellent flowing properties; very easy to level out.
  • Excellent chemical resistance.
  • Easy to clean and sterilize with low maintenance costs.
  • Withstands heavy traffic; very durable.
  • Offers protection against high humidity and moisture, frequent spillage of chemicals, heavy abrasion, impact, and heavy pedestrian and vehicular traffic.

Applications:

The product should be used on cleaned, horizontal concrete or asphalt floors. Typical uses are manufacturing, packaging and warehousing areas subjected to heavy foot and pallet truck traffic, and where a degree of flexing of the floor is expected. Use RUST-OLEUM 5401 or 5421 Impregnation primer on porous mineral substrates. Use RUST-OLEUM B95SL – diluted with 20% Thinner 641 – on asphalt floors. On dense surfaces, apply a coat Rust-Oleum 3333 or 3366.

The product is not colour-fast and may change colour over time (exhibits a yellowing effect).Colour change depends on the UV light and heat levels present, hence the rate of changecannot be predicted.

General information

Uniclass 2015

Pr_35_31_22_18 Concrete floor paintsPrimary

CAWS

M12/110 Resin flooring

M60/180 Floor coating

M12/10 Resin flooring

M60/18 Special coating

Specification data - Concrete floor paints

Product Reference

Rust-O-Thane SL 9400

Colour

RAL 7001

RAL 7016

RAL 7035

Tile Red

Standard product features

Technical characteristics:

  • Density: 1.5 kg/L.
  • Finish: Gloss.
  • Solids content: 100%.
  • Heat resistance: 60°C (sustained dry heat).
  • Tensile strength: 10 MN/m².
  • Flexural strength: 15 MN/m².
  • Touch dry: 6 h (20°C/ 50% RH).
  • Fully cured: Five to seven days (20°C/ 50% RH).
  • Application temperature: 10°C (minimum). The substrate should exceed the dew point by 3°C.
  • VOC level (A/h): 0 g/L (VOC limit: 500 g/L).
  • Reaction to fire to EN 13501-1: Bfl-s1.
  • Wear resistance to EN ISO 5470-1: Weight loss <100 mg.
  • Surface hardness to ASTM D2240 (Shore D): 65.
  • Impact resistance to EN ISO 6272: 13 Nm.
  • Capillary absorption and permeability to water to EN 1062-3: 0.001 kg/m² x h0.5.
  • Elongation at break to BS 6319: 60%.
  • Slip resistance: Method described in BS 7976-2: Dry >40 low slip potential (in accordance with HSE and UKSRG guidelines).

Literature
Similar products from Tor Coatings Ltd (Rust-Oleum Industrial)