RonaFloor SL

Self-smoothing epoxy floor screed for seamless wearing surfaces, in areas of medium foot and vehicle traffic. It is typically applied 2–3 mm thick and povides a smooth, gloss finish which is hygienic, waterproof and dustproof, with good chemical and abrasion resistance.

Features and benefits:

• Bond strength exceeds cohesive strength of substrate concrete.
• Achieves rebound value of 75 N/mm² in BRE drop hammer impact resistance test.
• Mean depth of wear less than 0.01 mm, as defined in BS 8204-2.
• Meets requirements of the Resin Flooring Association (FeRFA) classification type 5.
• Smooth texture, unless modified with slip resistant aggregate to produce variable surface texture.

Application:

• Prepare the substrate in accordance with instructions.
• Apply at least one coat of RonaFloor Epoxy Primer depending on substrate porosity.
• Drying concrete may require the application of RonaFloor Epoxy DPM.
• Apply RonaFloor SL and spread to required thickness with a notched trowel.
• If slip resistance is required, RonaFloor HB100 or HB200, incorporating slip resistant aggregate should be applied to RonaFloor SL.