RonaFloor SL

Application

  • Prepare the substrate in accordance with instructions.
  • Apply at least one coat of RonaFloor Epoxy Primer depending on substrate porosity.
  • Drying concrete may require the application of RonaFloor Epoxy DPM.
  • Apply RonaFloor SL and spread to required thickness with a notched trowel.
  • If slip resistance is required, RonaFloor HB100 or HB200, incorporating slip resistant aggregate, should be applied to RonaFloor SL.

Description

Self-smoothing epoxy floor screed for seamless wearing surfaces in areas of medium foot and vehicle traffic. It is typically applied 2–3 mm thick and povides a smooth, gloss finish which is hygienic, waterproof and dustproof, with good chemical resistance and abrasion resistance.

Features:

  • Bond strength: Exceeds cohesive strength of substrate concrete.
  • Impact resistance: Achieves rebound value of 75 N/mm² in BRE drop hammer test.
  • Mean depth of wear: Less than 0.01 mm as defined in BS 8204-2.
  • Meets requirements of the Resin Flooring Association (FeRFA) classification type 5.
  • Smooth texture, unless modified with slip resistant aggregate to produce variable surface texture.

Application:

  • Prepare the substrate in accordance with instructions.
  • Apply at least one coat of RonaFloor Epoxy Primer depending on substrate porosity.
  • Drying concrete may require the application of RonaFloor Epoxy DPM.
  • Apply RonaFloor SL and spread to required thickness with a notched trowel.
  • If slip resistance is required, RonaFloor HB100 or HB200, incorporating slip resistant aggregate, should be applied to RonaFloor SL.

General information

Features

Bond strength: Exceeds cohesive strength of substrate concrete

Impact resistance: Achieves rebound value of 75 N/mm² in BRE drop hammer test

Mean depth of wear: Less than 0.01 mm as defined in BS 8204-2

Meets requirements of the Resin Flooring Association (FeRFA) classification type 5

Smooth texture, unless modified with slip resistant aggregate to produce variable surface texture

Uniclass 2015

Pr_35_31_06_80 Smoothing and levelling underlay compoundsPrimary

CAWS

M10/17 Proprietary polymer modified wearing screeds

M10/185 Proprietary polymer modified wearing screeds

M12/10 Resin flooring

M12/110 Resin flooring

Specification data - Smoothing and levelling underlay compounds

Product Reference

RonaFloor SL

Colour

00A01, light grey

00A05, mid grey

00A09, dark grey

04C39, brick red

08E51, yellow

14C39, racing green

14E53, bright green

18E53, bright blue

Similar products from Ronacrete Ltd

RonaFloor Epoxy Floor Mortar

RonaFloor Epoxy Floor Mortar