RonaFloor PU Coating

Application

  • Prepare substrate in accordance with instructions.
  • Ensure that substrate is dry.
  • Apply two or more coats of RonaFloor PU Coating.
  • Slip resistance may be introduced by adding slip resistant aggregate to the wet first coat. When using slip resistant aggregate, care must be taken to ensure that the correct aggregate size is chosen. Aggregates larger than 0.3 mm should not be used.

Description

Moisture cured polyurethane coating to seal, case harden, bind and protect porous floor and wall surfaces. It is suitable for use on concrete, masonry and other substrates, both externally and internally, subject to foot traffic or medium duty industrial traffic.

Features:

  • Adhesion to dry concrete: Exceeds 3 N/mm² before failure of substrate.
  • Clear colour; pigment may be added but several coats may be required for full opacity.
  • Mean depth of wear: Less than 0.01 mm, as defined in BS 8204-2.

Application:

  • Prepare substrate in accordance with instructions.
  • Ensure that substrate is dry.
  • Apply two or more coats of RonaFloor PU Coating.
  • Slip resistance may be introduced by adding slip resistant aggregate to the wet first coat. When using slip resistant aggregate, care must be taken to ensure that the correct aggregate size is chosen. Aggregates larger than 0.3 mm should not be used.

General information

Features

Adhesion to dry concrete: Exceeds 3 N/mm² before failure of substrate

Clear colour; pigment may be added but several coats may be required for full opacity

Mean depth of wear: Less than 0.01 mm, as defined in BS 8204-2

Uniclass 2015

Pr_35_31_77_76 SealersPrimary

CAWS

M60/180 Floor coating

Specification data - Sealers

Product Reference

RonaFloor PU Coating