NBS Source
List your products
RonaFloor Epoxy Floor Mortar
Application

  • Prepare the concrete in accordance with instructions.
  • Prime with RonaFloor Epoxy Primer.
  • Apply RonaFloor Epoxy Floor Mortar minimum 5 mm thick.
  • Level and trowel finish.
  • Optionally apply sealer such as RonaFloor PU Coating, one or two coats.

Description

High performance, resin rich epoxy floor screed, suitable for providing new, thin bonded wearing surfaces and patch repairing screed to BS 8204-6, Heavy Duty category. It provides a hygienic, impermeable finish requiring no seal coat.

Features:

  • Good chemical, wear and abrasion resistance.
  • Slip resistant texture.
  • Thin section application from 5 mm thick.
  • Waterproof to BS 1881, initial surface absorption 0.0 ml/m²/sec.

Application:

  • Prepare the concrete in accordance with instructions.
  • Prime with RonaFloor Epoxy Primer.
  • Apply RonaFloor Epoxy Floor Mortar minimum 5 mm thick.
  • Level and trowel finish.
  • Optionally apply sealer such as RonaFloor PU Coating, one or two coats.

General information

Features

Good chemical, wear and abrasion resistance

Slip resistant texture

Thin section application from 5 mm thick

Waterproof to BS 1881, initial surface absorption 0.0 ml/m²/sec

Uniclass 2015

Pr_35_31_06_80 Smoothing and levelling underlay compoundsPrimary

CAWS

M10/17 Proprietary polymer modified wearing screeds

M10/185 Proprietary polymer modified wearing screeds

M12/10 Resin flooring

M12/110 Resin flooring

Specification data - Smoothing and levelling underlay compounds

Product Reference

RonaFloor Epoxy Floor Mortar

Type

Standard set

Light foot traffic after 10–12 hours, heavy after 16 hours.

Rapid set

Heavy foot traffic after 4 hours.

Colour

Grey

Standard.

Blue

Brown

Charcoal

Green

Red

Yellow

Similar products from Ronacrete Ltd