RonaBond Slurry Coat

Application

  • Apply coating by slurry brush or roller.
  • Apply typically 2–3 coats to achieve desired finish.
  • Prepare concrete in accordance with instructions.

Description

Pre-packed water-based, acrylic polymer modified slurry coat and pore filler for concrete surfaces. It is suitable for levelling, filling blowholes and filling pebble nests in concrete surfaces.

Features:

  • 1–3 mm application depth in single pass.
  • Concrete coloured textured coating.
  • Good adhesion to substrate: Greater than 1.3 N/mm².
  • Water and frost resistant with carbonation protection.

Application:

  • Apply coating by slurry brush or roller.
  • Apply typically 2–3 coats to achieve desired finish.
  • Prepare concrete in accordance with instructions.

General information

Features

1–3 mm application depth in single pass

Concrete coloured textured coating

Good adhesion to substrate: Greater than 1.3 N/mm²

Water and frost resistant with carbonation protection

Uniclass 2015

Pr_20_31_53_66 Polymer-modified cementitious slurriesPrimary

CAWS

C42/315 Protective coating to reinforcement

C42/320 Levelling/ smoothing coats

Specification data - Polymer-modified cementitious slurries

Product Reference

RonaBond Slurry Coat