Revlane+ Taloche Fin/ Gros

Revlane+ Taloche Fin/ Gros

Parex Ltd Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

  • QA Certificate

    QA Certificate

    Certificate type

Fine or coarse drag effect textured synthetic decorative coating.

Jump to:
+44 (0)1827 711755


Pre-mixed, vapour-permeable ready to apply acrylic/ silicone-based decorative coating for external and internal walls. Finished appearance is based upon grain size. Pack size: 25 kg bucket.


  • Excellent hiding power and flexibility characteristics.
  • Revlane+ finishes are water-vapour permeable. They do not create a vapour retarder.
  • Product also known as DPR Sand Fine (Revlane+ Taloche Fin) and DPR Sand Coarse (Revlane+ Taloche Gros).

Suitable for:

  • In-situ and pre-formed concrete. If required level the surface first with Parex base coat Maite.
  • Base coats in accordance with BS 13914-1.
  • Parex coloured one-coat renders, e.g. Monorex GF.
  • ParexDirect or ParexTherm range of Thermal Insulation Systems.
  • Advanced Masonry Simulation.
  • Parexlanko grey one-coat renders e.g. Parmurex/ Parex waterproofing undercoat systems.
  • Existing flat substrates.
  • Internal walls, drylining plaster (gypsum) substrates. Prepare and apply Revlane+ Regulateur.
  • Painted substrates: The existing paint must demonstrate adequate adhesion or be removed. Prime the surface with Revlane+ Regulateur.
  • Parex profiles.

Unsuitable for:

Lime based substrates.


  • Revlane+ Taloche Fin/ Gros can create a range of textures and finishes in addition to horizontal dragged or vertical dragged appearances.
  • Sand Smooth is best applied using a spraying technique to achieve a uniform smoothness.
  • The range of differing finishes is commonly used with the Advanced Masonry Simulation system.
  • For additional information on the range of finishes consult the Parex literature referenced DPR Textured Finishes.


  • BS EN 13914-1 Code of practice for external rendering.
  • BS 8000 Workmanship on building sites.
  • BS EN ISO 14001:2004.

General information


Excellent hiding power and flexibility characteristics

Revlane+ finishes are water-vapour permeable. They do not create a vapour retarder

Product also known as DPR Sand Fine (Revlane+ Taloche Fin) and DPR Sand Coarse (Revlane+ Taloche Gros)

Uniclass 2015

Pr_35_31_64_65 Polymer-modified rendersPrimary


M20/160 Proprietary cement gauged render

M21/20 External wall insulation system . . . . . .

M21/210 External wall insulation system

Specification data - Polymer-modified renders

Product Reference

Revlane+ Taloche Fin

1.0 mm grain size.

Revlane+ Taloche Gros

1.6 mm grain size.


48 standard colours available. Contact manufacturer for colour samples.



Revlane+ Regulateur

600 Sealer


Masonry Templates

Parex Profiles

Standard product features


Ready-to-use liquid paste containing:

  • Synthetic resins.
  • Mineral fillers.
  • Pigments.
  • Specific admixtures.

Technical Data:

  • Water vapour permeability: V2.
  • Water absorption: W3.
  • Adhesion: >0.3 Mpa.
  • Reaction to fire: A2-s1, d0.

Third party certifications

  • 10/4275 : CE Mark to EN 15824
  • European Technical Approval : 04/0114 (New 2010 approvals pending)
  • Technical Application Document : DAT 7/04-1376
  • Irish Agrement Board (IAB) : 09/0332 and 09/0342

Similar products from Parex Ltd



Monogris E

Monogris E