Verified by manufacturer 22 days ago
Retanol Xtreme - Quick Dry Screed (Bonded)
BREEAM - Certification
TUV - Safety and Quality Report
Wheel Mark - Certificate of Approval
Wheel Mark - Certificate of Conformity
High strength, very quick drying proprietary screed. Guaranteed technical performance and compressive strengths of 40–60 N/mm². A safe and sustainable solution, offering market leading performance.
Intended for internal and external use. Suitable for permanently wet areas. Mostly recommended for hospitals, schools, prisons, retail and commercial premises.
Retanol allows for final floor finishes after only 3 days and offers the finished underfloor heating commission protocol in only 4 days. Saves on average of 5 weeks against others!
Proprietary liquid additive for installing heavy duty fast-cure, rapid drying, low shrinkage and low tension bonded, unbonded or floating cement based floor screeds. Enhances pumping and workability enormously.
Compliant with BS 8204-1, BS EN 13892-2 and BS 8203.
Features and benefits:
M10/130 Proprietary quick drying levelling screeds
M10/7 Proprietary quick drying levelling screeds
Insert detailed requirements for example A-L, A-LL, B-L, B-LL.
See the PCT Cement List on manufacturer's website for further information.
Ordinary Portland CEM I.
Ordinary Portland CEM II 32.5 N.
Ordinary Portland CEM II 42.5 N.
6 mm single sized granite stone chippings.
8 mm single sized granite stone chippings.
0–4 mm sharp screeding sand with a grading curve of 70% fines (0–2 mm diameter) and 30% coarse (>2 mm to 4 mm in diameter)
Very high early strength and very quick drying time non-hazardous screed additive.
Up to 60% greater thermal conductivity with underfloor heating (λ = 2.35 W/m²K) than traditional cementitious semi-dry screeds due to self-compaction and reduced air pores.
Obtainable minimum strengths of CT-C40-F6 up to CT-C60-F8 depending on aggregates and amount of cement in accordance with DIN 1045-2.
80% of Retanol’s final strength is achieved within the first four days.
Compressive strength – 1 day
Compressive strength – 7 days
Minimum 40 N/mm².
Compressive strength – 28 days
Full strength achieved.
Two days for tile finish, three days for all other finishes.
At 75 mm thickness.
Insert details as required.
All epoxy coatings and systems.
PU and MMA resins.
1.1 L per tonne of screed or 400 mL per standard pump gauge.
High traffic areas such as airports, shopping centres, education and research and hospitals where a high strength (BRE Category A) screed is required.
BREEAM and TÜV Rheinland Certifications available upon request from the manufacturer and also fully satisfies German DIN Standards (Deutsches Institut für Normung - German Institute for Standardization).
BRE Category A Screed after five days.
1.9–2.9 N/mm² during independent testing.
Category A Screed after five days, guaranteed.
2100 kg/m³ dry screed.
Category A guaranteed.
The market leading ultra fast-track screed for guaranteed very quick drying times and very high early and final strengths, Retanol Xtreme is installed in hospitals, schools, prisons, football stadia, theatres and retail and commercial premises, providing a guaranteed, high performance screed and delivering significant programme savings both in terms of cost and time.
Contains Red List materials
Country of material origin
Country of product manufacture
A1-A3 (production stage) as defined in BS EN 15804
Refer to BREEAM certificate.
Please refer to BREEAM certificate
NBS BIM object standard
This BIM object has been authored to meet the requirements of the NBS BIM object standard.
Find out more about the NBS BIM object standard.