NBS Source
List your products
RAVATHERM XPS X UB300

RAVATHERM XPS X UB300

Third party certifications:
  • BSI Kitemark

    BSI Kitemark

    Certificate type

Ravago Building Solutions

Ravatherm XPS X UB300 pairs the exceptional thermal performance of Ravatherm XPS X 300 SB with a 6mm fibre cement layer, resulting in a specialist insulation board for use on parapets and upstands.

Jump to:
+44 (0) 7790 542312 www.ravagobuildingsolutions.co.uk
Application

Suitable for use on parapets and upstands in flat roof applications.

Description

Ravatherm XPS X UB300 pairs the thermal performance of Ravatherm XPS X 300 SB with a 6mm fibre cement layer to address the challenge of thermal bridging in flat roofs.

Features and benefits:

  • Excellent thermal insulation capability.
  • Waterproof; negligible moisture uptake.
  • Energy-saving.
  • Environmentally friendly.
  • Frost-resistant.
  • Resistant to high loads.
  • Simple installation.
  • Quick installation.
  • Does not slump or shrink.

Application:

Suitable for use on parapets and upstands in flat roof applications.

General information
Finish

6mm fibre cement topping on one external face

Color

Steel grey

Material

Extruded polystyrene

Shape

Rectangular

Size

1200 x 56 x 600 mm

Uniclass 2015
Pr_25_71_63_29 Extruded polystyrene (XPS) boardsPrimary
CAWS

J21/440 Inverted roof insulation

J41/440 Inverted roof insulation

J42/440 Inverted roof insulation

Q37/310 Inverted roof insulation

Specification data - Extruded polystyrene (XPS) boards
Product Reference

RAVATHERM XPS X UB300

Primarily used for parapets and upstands.

Third party product certification

BRE

Fire performance

Euroclass E, Class A1

To BS EN 13501-1. Products contain an ecologically safe flame-retardant additive.

Compressive strength (minimum) at 10% compression

300 kPa

To EN 826. To plan the reinforcement steel requirements of floor slab used as a load-distribution structure over the thermal insulation layer, please consult a structural engineer.

Thermal conductivity (maximum)

<60 mm - 0.030 W/m·K

Typical thickness 50 mm to EN 13164.

Thickness

50 mm

Face Size (length x width)

1200 x 600 mm

The maximum installation depth of the thermal insulation is determined by the load: the horizontal pressure must not exceed the compressive strength of the boards, taking into account the value of the permanent load.

Recycled content

Ravatherm XPS X uses carbon dioxide as a blowing agent, which gives it an ozone-depleting potential (ODP) of zero and a Global Warming Potential (GWP) of less than five.

Facing

6 mm fibre cement flat sheet

Fibre cement topping on external face Ravatherm XPS X 300 SB.

Edges

Butt edge

This product must be laid with no gaps between the boards in structures with contact to soil. For gluing, solvent-free adhesives must be used. Follow the supplier’s guidance.

TemperatureRange

-50–75°C maximum

Provides the permanent application temperature of Ravatherm XPS X products. At higher temperatures, the boards will start to soften and suffer permanent deformation.

Standard product features

Colours:

Grey.

Features:

Environmental friendly and a cost efficient solution to thermal bridging in flat roof applications,

Finish:

6 mm fibre cement flat sheet.

Material:

Homogeneous, closed-cell material structure comprised of extruded polystyrene (XPS), a rigid form of insulation with 6 mm fibre cement layer.

Shape:

Rectangular boards.

Size:

1200 x 600 x 50 mm - Overall length x width x thickness per board.

Environmental information
Recycled content

Ravatherm XPS X uses carbon dioxide as a blowing agent, which gives it an ozone-depleting potential (ODP) of zero and a Global Warming Potential (GWP) of less than five.

Digital objects
PlatformCompatibleVersionCertified to
IFC
- 1 2.1
Revit
- 1 2.1
Download now from NBS National BIM Library
Literature
Third party certifications
  • BS EN 13501-1 - Fire classification of construction products and building elements. Classification using data from reaction to fire tests : Once the insulation is placed in the inverted roof, if the finishing used is that covered by the European Commission Decision EC 2000/553/EC, the designation of the roof is Broof(t4) hence complying with Requirement B4 (External Fire spread) of Approved Document B of the Building Regulations
  • BS EN 826:2013 - Thermal insulating products for building applications. Determination of compression behaviour
  • BS EN 13164:2008 - Thermal insulation products for buildings. Factory made products of extruded polystyrene foam (XPS)
Similar products from Ravago Building Solutions