QHPE QuelStop HPE Sealant

QHPE QuelStop HPE Sealant

Quelfire

High pressure expansion intumescent acrylic-based graphite sealant used to provide a fire rated linear joint or gap seal, and to maintain the fire rating of walls and floors where they have been penetrated by services.

Jump to:
+44 (0)161 928 7308 quelfire.co.uk

Application

Mineral wool (minimum 80 kg/m³) or polyethylene (PE) backing rod, where required, can be used as a backing material to ensure the correct depth of sealant is applied in order to achieve the required performance.

The high pressure sealant should not be applied if the ambient temperature is below 5°C or above 40°C, as the adhesion may be impaired.

The sealant should be installed to the correct annulus and depth depending on the penetrating services/ material specification. The total annular space should be filled with compacted QHPE QuelStop HPE Sealant. Once compacted, the sealant should be smoothed off to produce a neat finish.

Description

High pressure expansion intumescent acrylic-based graphite sealant used to provide a fire rated linear joint or gap seal, and to maintain the fire rating of walls and floors where they have been penetrated by services.

Features and benefits:

  • Shelf life: 18 months.
  • Manufactured in the UK.
  • Expected to last the lifetime of the building.

- Suitable for:

  • Use in flexible walls, rigid walls and floors.
  • Use in QuelStop Fire Batts (specified separately).
  • Linear joints up to 20 mm wide.
  • Use around cables, cable bunches, cable trays and cable ladders.
  • Use around plastic pipes, metallic pipes and insulated non-combustible pipes.
  • Use with Lubrizol® chlorinated polyvinyl chloride (CPVC) piping systems and materials, such as FlowGuard® pipe and fittings and BlazeMaster® fire sprinkler systems.
  • Use with Spears® CPVC Products, such as FlameGuard® CPVC fire sprinkler products, LabWaste® CPVC corrosive waste drainage system and EverTuff® CPVC CTS plumbing system.
  • Low movement joints, and will remain flexible.

Standards and approvals:

  • Up to four hour fire rating (EI 240).
  • Fire resistance testing to BS EN 1366-3: 2009.
  • Fire resistance testing to BS EN 1366-4: 2006.
  • Classified to EN 13501-2: 2007 + A1: 2009.
  • FBC™ System Compatible (for use with Lubrizol® piping systems).
  • Spears® product compatible.

Application:

Mineral wool (minimum 80 kg/m³) or polyethylene (PE) backing rod, where required, can be used as a backing material to ensure the correct depth of sealant is applied in order to achieve the required performance.

The high pressure sealant should not be applied if the ambient temperature is below 5°C or above 40°C, as the adhesion may be impaired.

The sealant should be installed to the correct annulus and depth depending on the penetrating services/ material specification. The total annular space should be filled with compacted QHPE QuelStop HPE Sealant. Once compacted, the sealant should be smoothed off to produce a neat finish.

General information

Uniclass 2015

Pr_30_31_76_02 Acrylic construction joint sealantsPrimary

CAWS

E40/530 Sealant

F30/610 Movement joints with sealant

F30/76 Movement joints with sealant

L20/80 Sealant joints

L20/820 Sealant joints

null Sealant – fire-resisting acrylic

Specification data - Acrylic construction joint sealants

Product Reference

QHPE QuelStop HPE Sealant

Standard product features

Technical characteristics:

  • Form: Paste.
  • Colour: Grey.
  • Odour: Barely perceptible.
  • Relative density: 1.3.
  • pH: Approximately 7.

Similar products from Quelfire

QSS QuelStop Acrylic Sealant

QSS QuelStop Acrylic Sealant