Compare

ProTherm G XPS X 300 SL Insulation

Name: ProTherm G XPS X 300 SL Insulation
Brand: Radmat Building Products Ltd
SKU: csud16Tpxw1sVbahxtF4gS

Verified by manufacturer 3 months ago

Declared thermal conductivity: 0.030 W/m·K

Radmat Building Products Ltd

Third party certifications:

BBA Agrément Certificate
Certificate type
EPD
Certificate type

Inverted roof insulation with a unique rigid, closed cell type extruded polystyrene board with integral high density skin.

Jump to:

+44 (0)1858 410372 Website

Application

ProTherm G XPS X 300 SL is suitable for use in roofs, roof terraces, enclosed balconies over heated space and insulated walkways in an inverted roof construction.
When used in the inverted roof constructions listed in the Fire Performance section below roof constructions incorporating ProTherm G XPS X 300 SL achieve B_ROOF(t4) Classification to BS EN 13501-5 as required by Approved Document B 2019 edition, Section B4, Limitations on roof coverings.
ProTherm G XPS X 300 SL is not suitable for use in inverted roof applications on specified attachments such as projecting open balconies, projecting enclosed balconies, recessed open balconies or recessed enclosed balconies.
ProTherm G XPS X 300 SL is not suitable for use in warm roof applications (where the waterproofing is installed above the insulation board).

Description

ProTherm G XPS X 300 SL inverted roof insulation is a unique rigid, closed cell type extruded polystyrene board with integral high density skin.

Features and benefits:

ProTherm G XPS X 300 SL Inverted Roof Insulation utilises infra-red blocking particles to scatter and reflect heat radiation.
ProTherm G XPS X 300 SL Inverted Roof Insulation has a Zero Ozone Depletion Potential (ODP).
Global Warming Potential (GWP) of less than 5 and a Green Guide to Specification A+ rating.
For use with Inverted Roof Waterproofing such as PermaQuik PQ6100, EshaFlex, EshaUniversal, ParaFlex FD and ReadySeal. Use with ProTherm XPS X MK Water Flow Reducing Layer prior to the installation of paving, ballast or green roof.
ISO 9001:2008 Quality Management System, ISO 14001:2004 Environmental Management System, EPD as per ISO 14025 and EN 15804, Green Guide to Specification Certificate No. 508, BBA Certificate 21/5902.

For a comprehensive NBS specification contact Radmat Building Products.

General information

Color	Grey
Finish	Unfinished
Material	High density extruded polystyrene (XPS) Guidance for specification option: HFC free, Extruded polystyrene foam XPS (EN13164). EN designation code T1-CS(10\Y)300-CC(2/1,5/50)110-WL(T)0,7-WD(V)3-FT2-DS(TH)-DLT(2)5.
Shape	Rectangle
Length	1250 mm
Width	600 mm
Height	50 mm 80 mm 100 mm 115 mm 120 mm 130 mm 140 mm 145 mm 160 mm 165 mm 175 mm 180 mm 190 mm 195 mm 200 mm Show more

Uniclass	Pr_25_71_63_29 Extruded polystyrene (XPS) boardsPrimary
CAWS	Q37/310 Inverted roof insulation J31/332 Extruded polystyrene (XPS) insulation J21/440 Inverted roof insulation J31/340 Inverted roof insulation J41/440 Inverted roof insulation J42/440 Inverted roof insulation

Specification data - Extruded polystyrene (XPS) boards

Standard	To BS EN 13164.
Third-party certification	BBA Certificate Ref. 21/5902. Guidance for specification option: Note that sizes ≤80 mm are not assessed by the BBA certificate.
Fire performance	To BS EN 13501-1, Class E.
Compressive strength (minimum) at 10% compression	To BS EN 826, 300 kPa.
Thermal conductivity (maximum)	Declared thermal conductivity to BS EN 13164, 0.030 W/m·K. Design thermal conductivity to BS EN 13164, 0.031 W/m·K.
Thickness	50 mm. 80 mm. 100 mm. 115 mm. 120 mm. Manufacturer guidance Sizes ≤80 mm are not assessed by BBA Certificate 21/5902.
Face size (length x width)	1250 x 600 mm.
Facing	Skin.
Edges	Shiplap.

Thermal transmittance (U-Value)	Guidance for specification option: Consult manufacturer and insert requirements.
Density	To BS EN 1602, 32 kg/m³.
Compressive creep (design load) maximum 2% deflection after 50 years	To BS EN 1606, 130 kN/m².
Water absorption	To BS EN 12087, <0.7%. Manufacturer guidance Long term water absorption by immersion (28 days).
Water vapour diffusion resistance	To BS EN 12086, 150. Manufacturer guidance Water vapour diffusion resistance factor (μ), typical.
Co-efficient of linear thermal expansion	0.07 mm/m•K.
Service temperature	-50 to +75°C. Manufacturer guidance Maximum.

Sustainability data

Contains Red List materials	Yes
Country of material origin	Europe
Country of product manufacture	Europe
Material	High density extruded polystyrene (XPS) Guidance for specification option: HFC free, Extruded polystyrene foam XPS (EN13164). EN designation code T1-CS(10\Y)300-CC(2/1,5/50)110-WL(T)0,7-WD(V)3-FT2-DS(TH)-DLT(2)5.
Recyclability	Yes
Recycled content As defined in clause 7.8 of BS EN ISO 14021	0 %

Third party certifications

ProTherm G XPS X SL Environmental Product Declaration

Third party certifications

BBA Agrément Certificate

BBA-21-5902-Radmat ProTherm G XPS X 300SL Inverted Roof Insulation

EPD

ProTherm G XPS X SL Environmental Product Declaration

Literature

ProTherm G XPS X 300 SL

ProTherm G XPS X 300 SL Insulation

Application

Description

General information

Color

Finish

Material

Shape

Length

Width

Height

Uniclass

CAWS

Specification data - Extruded polystyrene (XPS) boards

Standard

To BS EN 13164.

Third-party certification

BBA Certificate Ref. 21/5902.

Fire performance

To BS EN 13501-1, Class E.

Compressive strength (minimum) at 10% compression

To BS EN 826, 300 kPa.

Thermal conductivity (maximum)

Declared thermal conductivity to BS EN 13164, 0.030 W/m·K.Design thermal conductivity to BS EN 13164, 0.031 W/m·K.

Thickness

50 mm.

80 mm.

100 mm.

115 mm.

120 mm.

Manufacturer guidance

Face size (length x width)

1250 x 600 mm.

Facing

Skin.

Edges

Shiplap.

Thermal transmittance (U-Value)

Density

Compressive creep (design load) maximum 2% deflection after 50 years

Water absorption

Manufacturer guidance

Water vapour diffusion resistance

Manufacturer guidance

Co-efficient of linear thermal expansion

Service temperature

Manufacturer guidance

Sustainability data

Contains Red List materials

Country of material origin

Country of product manufacture

Material

Recyclability

Recycled content

Third party certifications

Third party certifications

Literature

Similar products from Radmat Building Products Ltd

Declared thermal conductivity to BS EN 13164, 0.030 W/m·K.
Design thermal conductivity to BS EN 13164, 0.031 W/m·K.